Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 34 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10457): Process ended prematurely: osmo-stp_10.42.42.5(pid=10457) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10457)]

Standard Output

----------------------------------------------
trial-2364 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
20:13:19.973017 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:19.985070 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
20:13:20.135811 tst                          ping.py: using LAC 23441
20:13:20.264207 tst                          ping.py: using RAC 236
20:13:20.392540 tst                          ping.py: using CellId 23441
20:13:20.518850 tst                          ping.py: using BVCI 23442
20:13:20.543715 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.555092 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.566272 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.577380 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.588685 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.599688 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.610982 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
20:13:20.622025 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
20:13:20.900283 tst                       ping.py:19: start network...
20:13:21.026202 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:13:21.501071 run         create_hlr_db(pid=10451): Launched
20:13:21.676031 bus                          /gobi_6: Setting Powered False
20:13:22.698666 run         create_hlr_db(pid=10451): Terminated: ok {rc=0}
20:13:23.129996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10453): Launched
20:13:23.454019 run   osmo-hlr_10.42.42.2(pid=10454): Launched
20:13:23.574806 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:13:24.142761 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10456): Launched
20:13:24.465196 run   osmo-stp_10.42.42.5(pid=10457): Launched
20:13:24.582657 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:13:25.143274 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10459): Launched
20:13:25.258195 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:13:25.538147 run              patchelf(pid=10460): Launched
20:13:25.726324 run   osmo-stp_10.42.42.5(pid=10457): ERR: Terminated: ERROR {rc=1}  [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10457)]
20:13:25.863303 run   osmo-stp_10.42.42.5(pid=10457): stdout: 
| (launched: 2022-12-09_20:13:24.306590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:26.000879 run   osmo-stp_10.42.42.5(pid=10457): stderr: 
| �[0;m�[38;5;43m20221209201324499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209201324500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209201324500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209201324500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:26.133469 run   osmo-stp_10.42.42.5(pid=10457): stdout: 
| (launched: 2022-12-09_20:13:24.306590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:13:26.264780 run   osmo-stp_10.42.42.5(pid=10457): stderr: 
| �[0;m�[38;5;43m20221209201324499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209201324500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209201324500 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209201324500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209201324501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:13:26.417755 run              patchelf(pid=10460): Terminating (SIGINT)
20:13:26.597358 run              patchelf(pid=10460): Terminated: ok {rc=0}
20:13:26.629810 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10457): Process ended prematurely: osmo-stp_10.42.42.5(pid=10457) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10457)]  [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
20:13:26.639235 tst                       ping.py:22: Test FAILED (6.7 sec)
20:13:26.702182 run   osmo-hlr_10.42.42.2(pid=10454): ERR: Terminated: ERROR {rc=237}  [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10454)]
20:13:26.753489 run   osmo-hlr_10.42.42.2(pid=10454): stdout: 
| (launched: 2022-12-09_20:13:23.294373) 
20:13:26.805471 run   osmo-hlr_10.42.42.2(pid=10454): stderr: 
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209201323491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209201323504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209201323514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209201323514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209201323514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:13:26.849772 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10453): Terminating (SIGTERM)
20:13:26.891958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10456): Terminating (SIGTERM)
20:13:26.934296 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10459): Terminating (SIGTERM)
20:13:26.944049 ---      ParallelTerminationStrategy: PID 10453 died...
20:13:27.000355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10453): Terminated: ok {rc=0}
20:13:27.010612 ---      ParallelTerminationStrategy: PID 10456 died...
20:13:27.066693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10456): Terminated: ok {rc=0}
20:13:27.076599 ---      ParallelTerminationStrategy: PID 10459 died...
20:13:27.132696 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10459): Terminated: ok {rc=0}
20:13:27.219280 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10457): Process ended prematurely: osmo-stp_10.42.42.5(pid=10457) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10457)]