Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21181): Process ended prematurely: osmo-stp_10.42.42.5(pid=21181) [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21181)]
Standard Output
---------------------------------------------- trial-2365 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 22:01:23.110544 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.122520 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:01:23.279819 tst iperf3.py: using LAC 23947 22:01:23.403649 tst iperf3.py: using RAC 232 22:01:23.527329 tst iperf3.py: using CellId 23947 22:01:23.650951 tst iperf3.py: using BVCI 23948 22:01:23.675552 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.686920 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.698168 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.709614 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.720677 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.731863 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.743178 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.754172 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:23.765812 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:24.042431 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:01:24.168216 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:24.482355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21173): Launched 22:01:24.743292 run iperf3-srv_10.42.42.10(pid=21174): Launched 22:01:24.927085 tst iperf3.py:8: start network... 22:01:25.051893 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:01:25.525906 run create_hlr_db(pid=21175): Launched 22:01:25.699838 bus /gobi_6: Setting Powered False 22:01:26.722209 run create_hlr_db(pid=21175): Terminated: ok {rc=0} 22:01:27.149970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21177): Launched 22:01:27.472740 run osmo-hlr_10.42.42.2(pid=21178): Launched 22:01:27.593183 run osmo-stp_10.42.42.5: Starting osmo-stp 22:01:28.151233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21180): Launched 22:01:28.471719 run osmo-stp_10.42.42.5(pid=21181): Launched 22:01:28.588749 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:01:29.147583 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21183): Launched 22:01:29.262434 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:01:29.542949 run patchelf(pid=21184): Launched 22:01:29.731817 run osmo-stp_10.42.42.5(pid=21181): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21181)] 22:01:29.870244 run osmo-stp_10.42.42.5(pid=21181): stdout: | (launched: 2022-12-09_22:01:28.314322) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:30.008650 run osmo-stp_10.42.42.5(pid=21181): stderr: | �[0;m�[38;5;43m20221209220128507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220128507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220128508 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220128508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:30.141679 run osmo-stp_10.42.42.5(pid=21181): stdout: | (launched: 2022-12-09_22:01:28.314322) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:30.273366 run osmo-stp_10.42.42.5(pid=21181): stderr: | �[0;m�[38;5;43m20221209220128507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220128507 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220128508 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220128508 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220128509 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:30.428433 run patchelf(pid=21184): Terminating (SIGINT) 22:01:30.609757 run patchelf(pid=21184): Terminated: ok {rc=0} 22:01:30.643155 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21181): Process ended prematurely: osmo-stp_10.42.42.5(pid=21181) [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21181)] [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 22:01:30.652942 tst iperf3.py:8: Test FAILED (7.6 sec) 22:01:30.715448 run osmo-hlr_10.42.42.2(pid=21178): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21178)] 22:01:30.766942 run osmo-hlr_10.42.42.2(pid=21178): stdout: | (launched: 2022-12-09_22:01:27.315157) 22:01:30.818862 run osmo-hlr_10.42.42.2(pid=21178): stderr: | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220127515 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220127527 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220127535 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220127536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220127536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:30.863587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21173): Terminating (SIGTERM) 22:01:30.907041 run iperf3-srv_10.42.42.10(pid=21174): Terminating (SIGTERM) 22:01:30.959286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21177): Terminating (SIGTERM) 22:01:31.003954 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21180): Terminating (SIGTERM) 22:01:31.057504 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21183): Terminating (SIGTERM) 22:01:31.067907 --- ParallelTerminationStrategy: PID 21173 died... 22:01:31.128354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21173): Terminated: ok {rc=0} 22:01:31.138974 --- ParallelTerminationStrategy: PID 21174 died... 22:01:31.196099 run iperf3-srv_10.42.42.10(pid=21174): Terminated {rc=256} 22:01:31.206861 --- ParallelTerminationStrategy: PID 21177 died... 22:01:31.263846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21177): Terminated: ok {rc=0} 22:01:31.274353 --- ParallelTerminationStrategy: PID 21180 died... 22:01:31.332216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21180): Terminated: ok {rc=0} 22:01:31.342918 --- ParallelTerminationStrategy: PID 21183 died... 22:01:31.400458 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21183): Terminated: ok {rc=0} 22:01:31.502635 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21181): Process ended prematurely: osmo-stp_10.42.42.5(pid=21181) [trial-2365↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21181)]