Failed
gprs:oc2g+mod-bts0-egprs.iperf3.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21041): Process ended prematurely: osmo-stp_10.42.42.5(pid=21041) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21041)]
Standard Output
---------------------------------------------- trial-2365 gprs:oc2g+mod-bts0-egprs iperf3.py ---------------------------------------------- 21:59:23.951238 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:23.963090 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:59:24.095373 tst iperf3.py: using LAC 23937 21:59:24.221304 tst iperf3.py: using RAC 222 21:59:24.348542 tst iperf3.py: using CellId 23937 21:59:24.473322 tst iperf3.py: using BVCI 23938 21:59:24.496366 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.507211 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.517911 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.529130 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.539888 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.550561 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.561472 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.571773 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:59:24.582868 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:59:24.879762 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:59:25.013848 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:59:25.346975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21033): Launched 21:59:25.622657 run iperf3-srv_10.42.42.10(pid=21034): Launched 21:59:25.819101 tst iperf3.py:8: start network... 21:59:25.952397 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:59:26.463255 run create_hlr_db(pid=21035): Launched 21:59:26.648495 bus /gobi_6: Setting Powered False 21:59:27.668862 run create_hlr_db(pid=21035): Terminated: ok {rc=0} 21:59:28.094878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21037): Launched 21:59:28.414534 run osmo-hlr_10.42.42.2(pid=21038): Launched 21:59:28.530836 run osmo-stp_10.42.42.5: Starting osmo-stp 21:59:29.086334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21040): Launched 21:59:29.407673 run osmo-stp_10.42.42.5(pid=21041): Launched 21:59:29.524111 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:59:30.081886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21043): Launched 21:59:30.195782 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:59:30.476938 run patchelf(pid=21044): Launched 21:59:30.666547 run osmo-stp_10.42.42.5(pid=21041): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21041)] 21:59:30.805459 run osmo-stp_10.42.42.5(pid=21041): stdout: | (launched: 2022-12-09_21:59:29.249487) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:30.953937 run osmo-stp_10.42.42.5(pid=21041): stderr: | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215929444 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:31.082428 run osmo-stp_10.42.42.5(pid=21041): stdout: | (launched: 2022-12-09_21:59:29.249487) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:59:31.212195 run osmo-stp_10.42.42.5(pid=21041): stderr: | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209215929443 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209215929444 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209215929444 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:59:31.363027 run patchelf(pid=21044): Terminating (SIGINT) 21:59:31.542196 run patchelf(pid=21044): Terminated: ok {rc=0} 21:59:31.575876 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21041): Process ended prematurely: osmo-stp_10.42.42.5(pid=21041) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21041)] [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8] 21:59:31.586668 tst iperf3.py:8: Test FAILED (7.7 sec) 21:59:31.650514 run osmo-hlr_10.42.42.2(pid=21038): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21038)] 21:59:31.705056 run osmo-hlr_10.42.42.2(pid=21038): stdout: | (launched: 2022-12-09_21:59:28.257683) 21:59:31.757952 run osmo-hlr_10.42.42.2(pid=21038): stderr: | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209215928455 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209215928479 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:oc2g+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209215928492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209215928492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209215928492 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:59:31.801795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21033): Terminating (SIGTERM) 21:59:31.847017 run iperf3-srv_10.42.42.10(pid=21034): Terminating (SIGTERM) 21:59:31.896717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21037): Terminating (SIGTERM) 21:59:31.939971 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21040): Terminating (SIGTERM) 21:59:31.985083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21043): Terminating (SIGTERM) 21:59:31.996612 --- ParallelTerminationStrategy: PID 21033 died... 21:59:32.055769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21033): Terminated: ok {rc=0} 21:59:32.066706 --- ParallelTerminationStrategy: PID 21034 died... 21:59:32.124903 run iperf3-srv_10.42.42.10(pid=21034): Terminated {rc=256} 21:59:32.135413 --- ParallelTerminationStrategy: PID 21037 died... 21:59:32.192472 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21037): Terminated: ok {rc=0} 21:59:32.202196 --- ParallelTerminationStrategy: PID 21040 died... 21:59:32.255931 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21040): Terminated: ok {rc=0} 21:59:32.266065 --- ParallelTerminationStrategy: PID 21043 died... 21:59:32.320668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21043): Terminated: ok {rc=0} 21:59:32.410250 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21041): Process ended prematurely: osmo-stp_10.42.42.5(pid=21041) [trial-2365↪gprs:oc2g+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21041)]