ping.py gprs:sysmo+mod-bts0-dynts-ipa

Failing for the past 35 builds since #2331

Took 8 sec (from gprs_sysmo+mod-bts0-dynts-ipa)

Stack Trace

osmo-stp_10.42.42.5(pid=19786): Process ended prematurely: osmo-stp_10.42.42.5(pid=19786) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19786)]

Standard Output


----------------------------------------------
trial-2365 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
21:52:57.530908 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:57.542582 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
21:52:57.695185 tst                          ping.py: using LAC 23902
21:52:57.821015 tst                          ping.py: using RAC 187
21:52:57.946424 tst                          ping.py: using CellId 23902
21:52:58.071520 tst                          ping.py: using BVCI 23903
21:52:58.095958 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.107195 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.118254 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.129401 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.140295 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.151293 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.162493 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
21:52:58.173534 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
21:52:58.449490 tst                       ping.py:19: start network...
21:52:58.574128 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:52:59.044365 run         create_hlr_db(pid=19777): Launched
21:52:59.217769 bus                          /gobi_6: Setting Powered False
21:53:00.238750 run         create_hlr_db(pid=19777): Terminated: ok {rc=0}
21:53:00.639080 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19779): Launched
21:53:01.076195 run   osmo-hlr_10.42.42.2(pid=19780): Launched
21:53:01.255648 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:53:01.813385 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19782): Launched
21:53:02.277803 run   osmo-stp_10.42.42.5(pid=19786): Launched
21:53:02.517562 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:53:03.085343 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19796): Launched
21:53:03.201785 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:53:03.497164 run              patchelf(pid=19797): Launched
21:53:03.678491 run   osmo-stp_10.42.42.5(pid=19786): ERR: Terminated: ERROR {rc=1}  [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19786)]
21:53:03.810674 run   osmo-stp_10.42.42.5(pid=19786): stdout: 
| (launched: 2022-12-09_21:53:01.967762)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:53:03.943238 run   osmo-stp_10.42.42.5(pid=19786): stderr: 
| �[0;m�[38;5;43m20221209215302233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209215302234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209215302234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209215302234 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:53:04.070711 run   osmo-stp_10.42.42.5(pid=19786): stdout: 
| (launched: 2022-12-09_21:53:01.967762)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:53:04.196375 run   osmo-stp_10.42.42.5(pid=19786): stderr: 
| �[0;m�[38;5;43m20221209215302233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209215302234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209215302234 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209215302234 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209215302235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:53:04.345955 run              patchelf(pid=19797): Terminating (SIGINT)
21:53:04.521788 run              patchelf(pid=19797): Terminated: ok {rc=0}
21:53:04.553952 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=19786): Process ended prematurely: osmo-stp_10.42.42.5(pid=19786) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19786)]  [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
21:53:04.563651 tst                       ping.py:22: Test FAILED (7.0 sec)
21:53:04.629677 run   osmo-hlr_10.42.42.2(pid=19780): ERR: Terminated: ERROR {rc=237}  [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19780)]
21:53:04.682574 run   osmo-hlr_10.42.42.2(pid=19780): stdout: 
| (launched: 2022-12-09_21:53:00.791153) 
21:53:04.735237 run   osmo-hlr_10.42.42.2(pid=19780): stderr: 
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209215301023 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209215301044 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209215301053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209215301053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209215301053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:53:04.780015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19779): Terminating (SIGTERM)
21:53:04.823248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19782): Terminating (SIGTERM)
21:53:04.868739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19796): Terminating (SIGTERM)
21:53:04.879307 ---      ParallelTerminationStrategy: PID 19779 died...
21:53:04.938370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19779): Terminated: ok {rc=0}
21:53:04.948933 ---      ParallelTerminationStrategy: PID 19782 died...
21:53:05.005790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19782): Terminated: ok {rc=0}
21:53:05.016566 ---      ParallelTerminationStrategy: PID 19796 died...
21:53:05.074482 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19796): Terminated: ok {rc=0}
21:53:05.162050 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19786): Process ended prematurely: osmo-stp_10.42.42.5(pid=19786) [trial-2365↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19786)]