Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22662): Process ended prematurely: osmo-stp_10.42.42.5(pid=22662) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22662)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 22:11:00.265824 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.278372 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:11:00.423888 tst iperf3.py: using LAC 23998 22:11:00.544211 tst iperf3.py: using RAC 28 22:11:00.664573 tst iperf3.py: using CellId 23998 22:11:00.785299 tst iperf3.py: using BVCI 23999 22:11:00.808354 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.819774 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.833483 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.866261 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.884774 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.899542 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.923228 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.943193 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:00.957000 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:11:01.284721 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:11:01.424798 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:11:01.853558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22654): Launched 22:11:02.202621 run iperf3-srv_10.42.42.10(pid=22655): Launched 22:11:02.398263 tst iperf3.py:8: start network... 22:11:02.524674 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:11:03.003523 run create_hlr_db(pid=22656): Launched 22:11:03.179834 bus /gobi_6: Setting Powered False 22:11:04.199025 run create_hlr_db(pid=22656): Terminated: ok {rc=0} 22:11:04.602020 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22658): Launched 22:11:04.904304 run osmo-hlr_10.42.42.2(pid=22659): Launched 22:11:05.019695 run osmo-stp_10.42.42.5: Starting osmo-stp 22:11:05.552403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22661): Launched 22:11:05.854930 run osmo-stp_10.42.42.5(pid=22662): Launched 22:11:05.965382 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:11:06.492841 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22664): Launched 22:11:06.600774 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:11:06.865113 run patchelf(pid=22665): Launched 22:11:07.044114 run osmo-stp_10.42.42.5(pid=22662): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22662)] 22:11:07.174607 run osmo-stp_10.42.42.5(pid=22662): stdout: | (launched: 2022-12-09_22:11:05.706278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:07.306440 run osmo-stp_10.42.42.5(pid=22662): stderr: | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221105879 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:07.431597 run osmo-stp_10.42.42.5(pid=22662): stdout: | (launched: 2022-12-09_22:11:05.706278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:07.556237 run osmo-stp_10.42.42.5(pid=22662): stderr: | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209221105878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209221105879 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209221105879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:07.702062 run patchelf(pid=22665): Terminating (SIGINT) 22:11:07.873722 run patchelf(pid=22665): Terminated: ok {rc=0} 22:11:07.905106 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22662): Process ended prematurely: osmo-stp_10.42.42.5(pid=22662) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22662)] [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 22:11:07.914404 tst iperf3.py:8: Test FAILED (7.7 sec) 22:11:07.975087 run osmo-hlr_10.42.42.2(pid=22659): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22659)] 22:11:08.024175 run osmo-hlr_10.42.42.2(pid=22659): stdout: | (launched: 2022-12-09_22:11:04.755581) 22:11:08.073959 run osmo-hlr_10.42.42.2(pid=22659): stderr: | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209221104930 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209221104942 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209221104954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209221104954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209221104954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:11:08.115909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22654): Terminating (SIGTERM) 22:11:08.155665 run iperf3-srv_10.42.42.10(pid=22655): Terminating (SIGTERM) 22:11:08.195468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22658): Terminating (SIGTERM) 22:11:08.235424 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22661): Terminating (SIGTERM) 22:11:08.275246 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22664): Terminating (SIGTERM) 22:11:08.284632 --- ParallelTerminationStrategy: PID 22654 died... 22:11:08.338051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22654): Terminated: ok {rc=0} 22:11:08.347831 --- ParallelTerminationStrategy: PID 22655 died... 22:11:08.400833 run iperf3-srv_10.42.42.10(pid=22655): Terminated {rc=256} 22:11:08.410568 --- ParallelTerminationStrategy: PID 22658 died... 22:11:08.463920 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22658): Terminated: ok {rc=0} 22:11:08.473864 --- ParallelTerminationStrategy: PID 22661 died... 22:11:08.527049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22661): Terminated: ok {rc=0} 22:11:08.536592 --- ParallelTerminationStrategy: PID 22664 died... 22:11:08.589284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22664): Terminated: ok {rc=0} 22:11:08.678959 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22662): Process ended prematurely: osmo-stp_10.42.42.5(pid=22662) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22662)]