Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=22012): Process ended prematurely: osmo-stp_10.42.42.5(pid=22012) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22012)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 22:09:29.295399 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.306899 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:09:29.471508 tst ping.py: using LAC 23990 22:09:29.596900 tst ping.py: using RAC 20 22:09:29.721077 tst ping.py: using CellId 23990 22:09:29.845498 tst ping.py: using BVCI 23991 22:09:29.870096 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.881730 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.892819 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.904581 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.916029 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.927634 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.939375 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:09:29.950928 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:09:30.228268 tst ping.py:19: start network... 22:09:30.351629 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:09:30.819622 run create_hlr_db(pid=22006): Launched 22:09:31.032639 bus /gobi_6: Setting Powered False 22:09:32.064502 run create_hlr_db(pid=22006): Terminated: ok {rc=0} 22:09:32.494709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22008): Launched 22:09:32.811426 run osmo-hlr_10.42.42.2(pid=22009): Launched 22:09:32.931229 run osmo-stp_10.42.42.5: Starting osmo-stp 22:09:33.486844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22011): Launched 22:09:33.803410 run osmo-stp_10.42.42.5(pid=22012): Launched 22:09:33.918962 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:09:34.478121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22014): Launched 22:09:34.592146 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:09:34.868888 run patchelf(pid=22015): Launched 22:09:35.056409 run osmo-stp_10.42.42.5(pid=22012): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22012)] 22:09:35.193448 run osmo-stp_10.42.42.5(pid=22012): stdout: | (launched: 2022-12-09_22:09:33.648018) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:09:35.330164 run osmo-stp_10.42.42.5(pid=22012): stderr: | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220933839 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:09:35.461845 run osmo-stp_10.42.42.5(pid=22012): stdout: | (launched: 2022-12-09_22:09:33.648018) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:09:35.592023 run osmo-stp_10.42.42.5(pid=22012): stderr: | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220933838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220933839 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220933841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:09:35.745304 run patchelf(pid=22015): Terminating (SIGINT) 22:09:35.925209 run patchelf(pid=22015): Terminated: ok {rc=0} 22:09:35.958147 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=22012): Process ended prematurely: osmo-stp_10.42.42.5(pid=22012) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22012)] [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22] 22:09:35.967582 tst ping.py:22: Test FAILED (6.7 sec) 22:09:36.031222 run osmo-hlr_10.42.42.2(pid=22009): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22009)] 22:09:36.083266 run osmo-hlr_10.42.42.2(pid=22009): stdout: | (launched: 2022-12-09_22:09:32.656220) 22:09:36.135779 run osmo-hlr_10.42.42.2(pid=22009): stderr: | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220932855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220932869 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220932877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220932878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220932878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:09:36.180604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22008): Terminating (SIGTERM) 22:09:36.223058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22011): Terminating (SIGTERM) 22:09:36.265438 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22014): Terminating (SIGTERM) 22:09:36.275213 --- ParallelTerminationStrategy: PID 22008 died... 22:09:36.332154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22008): Terminated: ok {rc=0} 22:09:36.342465 --- ParallelTerminationStrategy: PID 22011 died... 22:09:36.398746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22011): Terminated: ok {rc=0} 22:09:36.408939 --- ParallelTerminationStrategy: PID 22014 died... 22:09:36.465161 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22014): Terminated: ok {rc=0} 22:09:36.553610 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22012): Process ended prematurely: osmo-stp_10.42.42.5(pid=22012) [trial-2365↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22012)]