Failed
gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24564): Process ended prematurely: osmo-stp_10.42.42.5(pid=24564) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24564)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-lms+mod-bts0-egprs ping.py ---------------------------------------------- 22:34:27.520630 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:27.531985 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:34:27.669749 tst ping.py: using LAC 24123 22:34:27.785966 tst ping.py: using RAC 153 22:34:27.909510 tst ping.py: using CellId 24123 22:34:28.036316 tst ping.py: using BVCI 24124 22:34:28.061107 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.072618 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.084015 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.095904 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.107388 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.118816 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.130778 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:34:28.142029 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:34:28.415576 tst ping.py:19: start network... 22:34:28.538818 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:34:29.006647 run create_hlr_db(pid=24558): Launched 22:34:29.180091 bus /gobi_6: Setting Powered False 22:34:30.199018 run create_hlr_db(pid=24558): Terminated: ok {rc=0} 22:34:30.621399 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24560): Launched 22:34:31.077205 run osmo-hlr_10.42.42.2(pid=24561): Launched 22:34:31.237173 run osmo-stp_10.42.42.5: Starting osmo-stp 22:34:31.875551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24563): Launched 22:34:32.257329 run osmo-stp_10.42.42.5(pid=24564): Launched 22:34:32.414558 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:34:32.969365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24566): Launched 22:34:33.082446 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:34:33.359004 run patchelf(pid=24567): Launched 22:34:33.545433 run osmo-stp_10.42.42.5(pid=24564): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24564)] 22:34:33.681596 run osmo-stp_10.42.42.5(pid=24564): stdout: | (launched: 2022-12-09_22:34:32.029013) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:34:33.818889 run osmo-stp_10.42.42.5(pid=24564): stderr: | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223432383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:34:33.950397 run osmo-stp_10.42.42.5(pid=24564): stdout: | (launched: 2022-12-09_22:34:32.029013) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:34:34.080348 run osmo-stp_10.42.42.5(pid=24564): stderr: | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209223432383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209223432383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209223432384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:34:34.233470 run patchelf(pid=24567): Terminating (SIGINT) 22:34:34.412249 run patchelf(pid=24567): Terminated: ok {rc=0} 22:34:34.444674 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24564): Process ended prematurely: osmo-stp_10.42.42.5(pid=24564) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24564)] [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22] 22:34:34.453993 tst ping.py:22: Test FAILED (6.9 sec) 22:34:34.517395 run osmo-hlr_10.42.42.2(pid=24561): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24561)] 22:34:34.569183 run osmo-hlr_10.42.42.2(pid=24561): stdout: | (launched: 2022-12-09_22:34:30.783765) 22:34:34.621588 run osmo-hlr_10.42.42.2(pid=24561): stderr: | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209223431079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209223431096 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209223431113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209223431113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209223431113 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:34:34.665895 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24560): Terminating (SIGTERM) 22:34:34.707805 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24563): Terminating (SIGTERM) 22:34:34.750266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24566): Terminating (SIGTERM) 22:34:34.760317 --- ParallelTerminationStrategy: PID 24560 died... 22:34:34.817519 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24560): Terminated: ok {rc=0} 22:34:34.827918 --- ParallelTerminationStrategy: PID 24563 died... 22:34:34.884116 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24563): Terminated: ok {rc=0} 22:34:34.894410 --- ParallelTerminationStrategy: PID 24566 died... 22:34:34.951275 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24566): Terminated: ok {rc=0} 22:34:35.038953 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24564): Process ended prematurely: osmo-stp_10.42.42.5(pid=24564) [trial-2365↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24564)]