Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 228 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1624): Process ended prematurely: osmo-stp_10.42.42.5(pid=1624) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1624)]

Standard Output

----------------------------------------------
trial-2366 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
00:16:43.838662 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:43.850323 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
00:16:43.996909 tst                        iperf3.py: using LAC 24667
00:16:44.115833 tst                        iperf3.py: using RAC 187
00:16:44.238745 tst                        iperf3.py: using CellId 24667
00:16:44.354376 tst                        iperf3.py: using BVCI 24668
00:16:44.377207 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.388009 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.399004 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.409746 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.420317 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.431044 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.441922 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.452503 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
00:16:44.463312 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
00:16:44.739248 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:16:44.864592 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:16:45.173785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1616): Launched
00:16:45.429783 run iperf3-srv_10.42.42.10(pid=1617): Launched
00:16:45.611871 tst                      iperf3.py:8: start network...
00:16:45.736581 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:16:46.281555 run          create_hlr_db(pid=1618): Launched
00:16:46.456492 bus                          /gobi_6: Setting Powered False
00:16:47.474219 run          create_hlr_db(pid=1618): Terminated: ok {rc=0}
00:16:47.899006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1620): Launched
00:16:48.218626 run    osmo-hlr_10.42.42.2(pid=1621): Launched
00:16:48.339888 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:16:48.897063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1623): Launched
00:16:49.216925 run    osmo-stp_10.42.42.5(pid=1624): Launched
00:16:49.333050 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:16:49.890370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1626): Launched
00:16:50.004525 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:16:50.283038 run               patchelf(pid=1627): Launched
00:16:50.470578 run    osmo-stp_10.42.42.5(pid=1624): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1624)]
00:16:50.607586 run    osmo-stp_10.42.42.5(pid=1624): stdout: 
| (launched: 2022-12-10_00:16:49.060249)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:50.745730 run    osmo-stp_10.42.42.5(pid=1624): stderr: 
| �[0;m�[38;5;43m20221210001649251 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210001649252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210001649252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210001649252 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:50.879295 run    osmo-stp_10.42.42.5(pid=1624): stdout: 
| (launched: 2022-12-10_00:16:49.060249)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:51.010904 run    osmo-stp_10.42.42.5(pid=1624): stderr: 
| �[0;m�[38;5;43m20221210001649251 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210001649252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210001649252 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210001649252 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001649253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:51.164388 run               patchelf(pid=1627): Terminating (SIGINT)
00:16:51.344586 run               patchelf(pid=1627): Terminated: ok {rc=0}
00:16:51.377944 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1624): Process ended prematurely: osmo-stp_10.42.42.5(pid=1624) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1624)]  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
00:16:51.388147 tst                      iperf3.py:8: Test FAILED (7.6 sec)
00:16:51.451471 run    osmo-hlr_10.42.42.2(pid=1621): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1621)]
00:16:51.503014 run    osmo-hlr_10.42.42.2(pid=1621): stdout: 
| (launched: 2022-12-10_00:16:48.062344) 
00:16:51.555121 run    osmo-hlr_10.42.42.2(pid=1621): stderr: 
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210001648262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210001648275 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210001648285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210001648286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210001648286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:16:51.599618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1616): Terminating (SIGTERM)
00:16:51.641811 run iperf3-srv_10.42.42.10(pid=1617): Terminating (SIGTERM)
00:16:51.683523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1620): Terminating (SIGTERM)
00:16:51.726177 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1623): Terminating (SIGTERM)
00:16:51.768097 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1626): Terminating (SIGTERM)
00:16:51.777899 ---      ParallelTerminationStrategy: PID 1616 died...
00:16:51.834248 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1616): Terminated: ok {rc=0}
00:16:51.844818 ---      ParallelTerminationStrategy: PID 1617 died...
00:16:51.901007 run iperf3-srv_10.42.42.10(pid=1617): Terminated {rc=256}
00:16:51.911022 ---      ParallelTerminationStrategy: PID 1620 died...
00:16:51.966871 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1620): Terminated: ok {rc=0}
00:16:51.977324 ---      ParallelTerminationStrategy: PID 1623 died...
00:16:52.033326 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1623): Terminated: ok {rc=0}
00:16:52.043741 ---      ParallelTerminationStrategy: PID 1626 died...
00:16:52.099818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1626): Terminated: ok {rc=0}
00:16:52.186210 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1624): Process ended prematurely: osmo-stp_10.42.42.5(pid=1624) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1624)]