Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)

Failing for the past 228 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1557): Process ended prematurely: osmo-stp_10.42.42.5(pid=1557) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1557)]

Standard Output

----------------------------------------------
trial-2366 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
00:15:44.144557 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.156499 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:15:44.293615 tst                        iperf3.py: using LAC 24662
00:15:44.420324 tst                        iperf3.py: using RAC 182
00:15:44.549321 tst                        iperf3.py: using CellId 24662
00:15:44.673238 tst                        iperf3.py: using BVCI 24663
00:15:44.697769 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.709204 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.720210 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.731610 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.743021 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.754391 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.766417 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.777740 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:15:44.789251 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:15:45.065637 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:15:45.190454 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:15:45.499724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1549): Launched
00:15:45.756826 run iperf3-srv_10.42.42.10(pid=1550): Launched
00:15:45.977250 tst                      iperf3.py:8: start network...
00:15:46.105253 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:15:46.635327 run          create_hlr_db(pid=1551): Launched
00:15:46.811611 bus                          /gobi_6: Setting Powered False
00:15:47.829931 run          create_hlr_db(pid=1551): Terminated: ok {rc=0}
00:15:48.255265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1553): Launched
00:15:48.575957 run    osmo-hlr_10.42.42.2(pid=1554): Launched
00:15:48.698031 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:15:49.256003 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1556): Launched
00:15:49.576929 run    osmo-stp_10.42.42.5(pid=1557): Launched
00:15:49.694643 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:15:50.255589 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1559): Launched
00:15:50.370947 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:15:50.650281 run               patchelf(pid=1560): Launched
00:15:50.838249 run    osmo-stp_10.42.42.5(pid=1557): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1557)]
00:15:50.975683 run    osmo-stp_10.42.42.5(pid=1557): stdout: 
| (launched: 2022-12-10_00:15:49.419294)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:15:51.113738 run    osmo-stp_10.42.42.5(pid=1557): stderr: 
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210001549613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:15:51.246435 run    osmo-stp_10.42.42.5(pid=1557): stdout: 
| (launched: 2022-12-10_00:15:49.419294)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:15:51.378099 run    osmo-stp_10.42.42.5(pid=1557): stderr: 
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210001549613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210001549613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001549614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:15:51.531551 run               patchelf(pid=1560): Terminating (SIGINT)
00:15:51.711723 run               patchelf(pid=1560): Terminated: ok {rc=0}
00:15:51.744711 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1557): Process ended prematurely: osmo-stp_10.42.42.5(pid=1557) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1557)]  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
00:15:51.754851 tst                      iperf3.py:8: Test FAILED (7.6 sec)
00:15:51.818930 run    osmo-hlr_10.42.42.2(pid=1554): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1554)]
00:15:51.870677 run    osmo-hlr_10.42.42.2(pid=1554): stdout: 
| (launched: 2022-12-10_00:15:48.418881) 
00:15:51.922986 run    osmo-hlr_10.42.42.2(pid=1554): stderr: 
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210001548619 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210001548635 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210001548645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210001548645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210001548645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:15:51.967569 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1549): Terminating (SIGTERM)
00:15:52.009537 run iperf3-srv_10.42.42.10(pid=1550): Terminating (SIGTERM)
00:15:52.051481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1553): Terminating (SIGTERM)
00:15:52.093729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1556): Terminating (SIGTERM)
00:15:52.135681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1559): Terminating (SIGTERM)
00:15:52.145649 ---      ParallelTerminationStrategy: PID 1549 died...
00:15:52.201828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1549): Terminated: ok {rc=0}
00:15:52.211920 ---      ParallelTerminationStrategy: PID 1550 died...
00:15:52.267490 run iperf3-srv_10.42.42.10(pid=1550): Terminated {rc=256}
00:15:52.278140 ---      ParallelTerminationStrategy: PID 1553 died...
00:15:52.334338 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1553): Terminated: ok {rc=0}
00:15:52.344601 ---      ParallelTerminationStrategy: PID 1556 died...
00:15:52.400578 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1556): Terminated: ok {rc=0}
00:15:52.410602 ---      ParallelTerminationStrategy: PID 1559 died...
00:15:52.466419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1559): Terminated: ok {rc=0}
00:15:52.552402 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1557): Process ended prematurely: osmo-stp_10.42.42.5(pid=1557) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1557)]