Failed
gprs:nanobts+band-1900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1585): Process ended prematurely: osmo-stp_10.42.42.5(pid=1585) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1585)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-1900+mod-bts0-egprs ping.py ---------------------------------------------- 00:16:13.742892 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:13.754881 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:16:13.891035 tst ping.py: using LAC 24664 00:16:14.014570 tst ping.py: using RAC 184 00:16:14.137923 tst ping.py: using CellId 24664 00:16:14.262641 tst ping.py: using BVCI 24665 00:16:14.286911 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.298372 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.309601 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.321151 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.332518 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.343957 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.355496 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:16:14.366886 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:16:14.654916 tst ping.py:19: start network... 00:16:14.787026 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:16:15.278794 run create_hlr_db(pid=1579): Launched 00:16:15.460140 bus /gobi_6: Setting Powered False 00:16:16.508753 run create_hlr_db(pid=1579): Terminated: ok {rc=0} 00:16:17.045683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1581): Launched 00:16:17.380060 run osmo-hlr_10.42.42.2(pid=1582): Launched 00:16:17.495592 run osmo-stp_10.42.42.5: Starting osmo-stp 00:16:18.018044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1584): Launched 00:16:18.310807 run osmo-stp_10.42.42.5(pid=1585): Launched 00:16:18.418558 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:16:18.932417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1587): Launched 00:16:19.037251 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:16:19.293855 run patchelf(pid=1588): Launched 00:16:19.465965 run osmo-stp_10.42.42.5(pid=1585): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1585)] 00:16:19.591620 run osmo-stp_10.42.42.5(pid=1585): stdout: | (launched: 2022-12-10_00:16:18.166913) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:16:19.717843 run osmo-stp_10.42.42.5(pid=1585): stderr: | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001618336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:16:19.839581 run osmo-stp_10.42.42.5(pid=1585): stdout: | (launched: 2022-12-10_00:16:18.166913) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:16:19.959831 run osmo-stp_10.42.42.5(pid=1585): stderr: | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001618335 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001618336 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001618338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:16:20.100047 run patchelf(pid=1588): Terminating (SIGINT) 00:16:20.264900 run patchelf(pid=1588): Terminated: ok {rc=0} 00:16:20.294962 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1585): Process ended prematurely: osmo-stp_10.42.42.5(pid=1585) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1585)] [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22] 00:16:20.303624 tst ping.py:22: Test FAILED (6.5 sec) 00:16:20.363379 run osmo-hlr_10.42.42.2(pid=1582): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1582)] 00:16:20.412582 run osmo-hlr_10.42.42.2(pid=1582): stdout: | (launched: 2022-12-10_00:16:17.232119) 00:16:20.462090 run osmo-hlr_10.42.42.2(pid=1582): stderr: | �[0;m�[1;31m20221210001617411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210001617411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210001617411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210001617412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210001617412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210001617412 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210001617424 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210001617433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210001617433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210001617433 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:16:20.503998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1581): Terminating (SIGTERM) 00:16:20.543470 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1584): Terminating (SIGTERM) 00:16:20.583091 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1587): Terminating (SIGTERM) 00:16:20.592280 --- ParallelTerminationStrategy: PID 1581 died... 00:16:20.645089 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1581): Terminated: ok {rc=0} 00:16:20.654715 --- ParallelTerminationStrategy: PID 1584 died... 00:16:20.707195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1584): Terminated: ok {rc=0} 00:16:20.716681 --- ParallelTerminationStrategy: PID 1587 died... 00:16:20.768875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1587): Terminated: ok {rc=0} 00:16:20.851522 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1585): Process ended prematurely: osmo-stp_10.42.42.5(pid=1585) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1585)]