Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1995): Process ended prematurely: osmo-stp_10.42.42.5(pid=1995) [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1995)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 00:21:55.372881 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.385064 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:21:55.531703 tst iperf3.py: using LAC 24695 00:21:55.657188 tst iperf3.py: using RAC 215 00:21:55.780696 tst iperf3.py: using CellId 24695 00:21:55.897154 tst iperf3.py: using BVCI 24696 00:21:55.920041 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.931139 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.942117 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.952922 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.963606 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.974331 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.985126 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:55.995788 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:21:56.006604 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:21:56.299480 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:21:56.434885 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:21:56.769719 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1987): Launched 00:21:57.047254 run iperf3-srv_10.42.42.10(pid=1988): Launched 00:21:57.246938 tst iperf3.py:8: start network... 00:21:57.383021 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:21:57.892285 run create_hlr_db(pid=1989): Launched 00:21:58.078857 bus /gobi_6: Setting Powered False 00:21:59.101808 run create_hlr_db(pid=1989): Terminated: ok {rc=0} 00:21:59.531058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1991): Launched 00:21:59.854061 run osmo-hlr_10.42.42.2(pid=1992): Launched 00:21:59.974020 run osmo-stp_10.42.42.5: Starting osmo-stp 00:22:00.535538 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1994): Launched 00:22:00.877025 run osmo-stp_10.42.42.5(pid=1995): Launched 00:22:01.136503 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:22:01.733297 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1997): Launched 00:22:01.845709 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:22:02.141816 run patchelf(pid=1998): Launched 00:22:02.332666 run osmo-stp_10.42.42.5(pid=1995): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1995)] 00:22:02.471461 run osmo-stp_10.42.42.5(pid=1995): stdout: | (launched: 2022-12-10_00:22:00.699068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:02.611095 run osmo-stp_10.42.42.5(pid=1995): stderr: | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002200964 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:02.745259 run osmo-stp_10.42.42.5(pid=1995): stdout: | (launched: 2022-12-10_00:22:00.699068) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:02.878278 run osmo-stp_10.42.42.5(pid=1995): stderr: | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002200963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002200964 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002200967 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:03.033486 run patchelf(pid=1998): Terminating (SIGINT) 00:22:03.214772 run patchelf(pid=1998): Terminated: ok {rc=0} 00:22:03.247952 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1995): Process ended prematurely: osmo-stp_10.42.42.5(pid=1995) [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1995)] [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 00:22:03.258115 tst iperf3.py:8: Test FAILED (7.9 sec) 00:22:03.322689 run osmo-hlr_10.42.42.2(pid=1992): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1992)] 00:22:03.374488 run osmo-hlr_10.42.42.2(pid=1992): stdout: | (launched: 2022-12-10_00:21:59.695317) 00:22:03.427064 run osmo-hlr_10.42.42.2(pid=1992): stderr: | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210002159893 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210002159905 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210002159914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210002159914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210002159914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:22:03.471700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1987): Terminating (SIGTERM) 00:22:03.513808 run iperf3-srv_10.42.42.10(pid=1988): Terminating (SIGTERM) 00:22:03.555510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1991): Terminating (SIGTERM) 00:22:03.597808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1994): Terminating (SIGTERM) 00:22:03.640249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1997): Terminating (SIGTERM) 00:22:03.650374 --- ParallelTerminationStrategy: PID 1987 died... 00:22:03.707630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1987): Terminated: ok {rc=0} 00:22:03.717957 --- ParallelTerminationStrategy: PID 1988 died... 00:22:03.774485 run iperf3-srv_10.42.42.10(pid=1988): Terminated {rc=256} 00:22:03.784729 --- ParallelTerminationStrategy: PID 1991 died... 00:22:03.841109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1991): Terminated: ok {rc=0} 00:22:03.851512 --- ParallelTerminationStrategy: PID 1994 died... 00:22:03.908606 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1994): Terminated: ok {rc=0} 00:22:03.918914 --- ParallelTerminationStrategy: PID 1997 died... 00:22:03.976236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1997): Terminated: ok {rc=0} 00:22:04.064056 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1995): Process ended prematurely: osmo-stp_10.42.42.5(pid=1995) [trial-2366↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1995)]