Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29724): Process ended prematurely: osmo-stp_10.42.42.5(pid=29724) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29724)]
Standard Output
---------------------------------------------- trial-2366 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 23:28:27.236086 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.247791 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:28:27.401997 tst iperf3.py: using LAC 24408 23:28:27.527264 tst iperf3.py: using RAC 183 23:28:27.650839 tst iperf3.py: using CellId 24408 23:28:27.775277 tst iperf3.py: using BVCI 24409 23:28:27.799590 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.811227 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.822499 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.833510 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.844516 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.855752 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.867121 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.878277 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:27.889489 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:28.163554 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:28:28.286990 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:28.592103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29716): Launched 23:28:28.845738 run iperf3-srv_10.42.42.10(pid=29717): Launched 23:28:29.025742 tst iperf3.py:8: start network... 23:28:29.153389 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:28:29.651303 run create_hlr_db(pid=29718): Launched 23:28:29.834850 bus /gobi_6: Setting Powered False 23:28:30.864562 run create_hlr_db(pid=29718): Terminated: ok {rc=0} 23:28:31.327685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29720): Launched 23:28:31.778838 run osmo-hlr_10.42.42.2(pid=29721): Launched 23:28:31.982714 run osmo-stp_10.42.42.5: Starting osmo-stp 23:28:32.538326 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29723): Launched 23:28:32.854283 run osmo-stp_10.42.42.5(pid=29724): Launched 23:28:32.969985 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:28:33.519266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29726): Launched 23:28:33.625028 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:28:33.883110 run patchelf(pid=29727): Launched 23:28:34.056165 run osmo-stp_10.42.42.5(pid=29724): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29724)] 23:28:34.183229 run osmo-stp_10.42.42.5(pid=29724): stdout: | (launched: 2022-12-09_23:28:32.699420) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:34.310966 run osmo-stp_10.42.42.5(pid=29724): stderr: | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232832891 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:34.433869 run osmo-stp_10.42.42.5(pid=29724): stdout: | (launched: 2022-12-09_23:28:32.699420) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:34.555521 run osmo-stp_10.42.42.5(pid=29724): stderr: | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232832891 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232832891 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232832892 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:34.697615 run patchelf(pid=29727): Terminating (SIGINT) 23:28:34.863780 run patchelf(pid=29727): Terminated: ok {rc=0} 23:28:34.894543 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29724): Process ended prematurely: osmo-stp_10.42.42.5(pid=29724) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29724)] [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 23:28:34.903558 tst iperf3.py:8: Test FAILED (7.7 sec) 23:28:34.962004 run osmo-hlr_10.42.42.2(pid=29721): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29721)] 23:28:35.010118 run osmo-hlr_10.42.42.2(pid=29721): stdout: | (launched: 2022-12-09_23:28:31.491973) 23:28:35.058930 run osmo-hlr_10.42.42.2(pid=29721): stderr: | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232831724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232831748 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232831761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232831761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232831761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:28:35.100405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29716): Terminating (SIGTERM) 23:28:35.139499 run iperf3-srv_10.42.42.10(pid=29717): Terminating (SIGTERM) 23:28:35.178441 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29720): Terminating (SIGTERM) 23:28:35.217475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29723): Terminating (SIGTERM) 23:28:35.257017 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29726): Terminating (SIGTERM) 23:28:35.266085 --- ParallelTerminationStrategy: PID 29716 died... 23:28:35.319571 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29716): Terminated: ok {rc=0} 23:28:35.329196 --- ParallelTerminationStrategy: PID 29717 died... 23:28:35.381977 run iperf3-srv_10.42.42.10(pid=29717): Terminated {rc=256} 23:28:35.391450 --- ParallelTerminationStrategy: PID 29720 died... 23:28:35.443948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29720): Terminated: ok {rc=0} 23:28:35.453509 --- ParallelTerminationStrategy: PID 29723 died... 23:28:35.506042 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29723): Terminated: ok {rc=0} 23:28:35.515548 --- ParallelTerminationStrategy: PID 29726 died... 23:28:35.568265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29726): Terminated: ok {rc=0} 23:28:35.656847 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29724): Process ended prematurely: osmo-stp_10.42.42.5(pid=29724) [trial-2366↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29724)]