Failed
gprs:trx-lms+mod-bts0-egprs.ping.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32665): Process ended prematurely: osmo-stp_10.42.42.5(pid=32665) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32665)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-lms+mod-bts0-egprs ping.py ---------------------------------------------- 00:01:17.387309 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.398686 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:01:17.535203 tst ping.py: using LAC 24584 00:01:17.658732 tst ping.py: using RAC 104 00:01:17.782345 tst ping.py: using CellId 24584 00:01:17.909541 tst ping.py: using BVCI 24585 00:01:17.933537 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.944830 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.955991 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.967688 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.979091 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:17.990402 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:18.001945 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:01:18.013250 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:01:18.300818 tst ping.py:19: start network... 00:01:18.433326 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:01:18.925900 run create_hlr_db(pid=32659): Launched 00:01:19.107620 bus /gobi_6: Setting Powered False 00:01:20.129512 run create_hlr_db(pid=32659): Terminated: ok {rc=0} 00:01:20.531566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32661): Launched 00:01:20.845526 run osmo-hlr_10.42.42.2(pid=32662): Launched 00:01:20.964285 run osmo-stp_10.42.42.5: Starting osmo-stp 00:01:21.512188 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32664): Launched 00:01:21.825505 run osmo-stp_10.42.42.5(pid=32665): Launched 00:01:21.940587 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:01:22.487951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32667): Launched 00:01:22.599890 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:01:22.866774 run patchelf(pid=32668): Launched 00:01:23.038872 run osmo-stp_10.42.42.5(pid=32665): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32665)] 00:01:23.165341 run osmo-stp_10.42.42.5(pid=32665): stdout: | (launched: 2022-12-10_00:01:21.671498) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:23.291851 run osmo-stp_10.42.42.5(pid=32665): stderr: | �[0;m�[38;5;43m20221210000121862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000121862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000121863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000121863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:23.414142 run osmo-stp_10.42.42.5(pid=32665): stdout: | (launched: 2022-12-10_00:01:21.671498) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:23.535582 run osmo-stp_10.42.42.5(pid=32665): stderr: | �[0;m�[38;5;43m20221210000121862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000121862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000121863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000121863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000121865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:23.675937 run patchelf(pid=32668): Terminating (SIGINT) 00:01:23.840755 run patchelf(pid=32668): Terminated: ok {rc=0} 00:01:23.870903 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=32665): Process ended prematurely: osmo-stp_10.42.42.5(pid=32665) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32665)] [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22] 00:01:23.879547 tst ping.py:22: Test FAILED (6.5 sec) 00:01:23.939637 run osmo-hlr_10.42.42.2(pid=32662): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32662)] 00:01:23.988355 run osmo-hlr_10.42.42.2(pid=32662): stdout: | (launched: 2022-12-10_00:01:20.691277) 00:01:24.037820 run osmo-hlr_10.42.42.2(pid=32662): stderr: | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210000120887 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210000120899 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-lms+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210000120907 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210000120908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210000120908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:01:24.079740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32661): Terminating (SIGTERM) 00:01:24.119381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32664): Terminating (SIGTERM) 00:01:24.158821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32667): Terminating (SIGTERM) 00:01:24.168055 --- ParallelTerminationStrategy: PID 32661 died... 00:01:24.220888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32661): Terminated: ok {rc=0} 00:01:24.230522 --- ParallelTerminationStrategy: PID 32664 died... 00:01:24.283603 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32664): Terminated: ok {rc=0} 00:01:24.293263 --- ParallelTerminationStrategy: PID 32667 died... 00:01:24.346354 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32667): Terminated: ok {rc=0} 00:01:24.429288 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32665): Process ended prematurely: osmo-stp_10.42.42.5(pid=32665) [trial-2366↪gprs:trx-lms+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32665)]