Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1041): Process ended prematurely: osmo-stp_10.42.42.5(pid=1041) [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1041)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py ---------------------------------------------- 00:08:39.632613 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:39.644838 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:08:39.786285 tst iperf3.py: using LAC 24624 00:08:39.912014 tst iperf3.py: using RAC 144 00:08:40.041296 tst iperf3.py: using CellId 24624 00:08:40.163684 tst iperf3.py: using BVCI 24625 00:08:40.188079 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.199824 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.211125 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.222719 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.234355 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.246112 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.258082 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.269841 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:08:40.281874 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:08:40.569398 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:08:40.701825 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:08:41.028155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1033): Launched 00:08:41.298985 run iperf3-srv_10.42.42.10(pid=1034): Launched 00:08:41.492814 tst iperf3.py:8: start network... 00:08:41.625864 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:08:42.146542 run create_hlr_db(pid=1035): Launched 00:08:42.329048 bus /gobi_6: Setting Powered False 00:08:43.351095 run create_hlr_db(pid=1035): Terminated: ok {rc=0} 00:08:43.756119 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1037): Launched 00:08:44.071001 run osmo-hlr_10.42.42.2(pid=1038): Launched 00:08:44.189471 run osmo-stp_10.42.42.5: Starting osmo-stp 00:08:44.738560 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1040): Launched 00:08:45.054113 run osmo-stp_10.42.42.5(pid=1041): Launched 00:08:45.169381 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:08:45.717723 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1043): Launched 00:08:45.830916 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:08:46.142700 run patchelf(pid=1044): Launched 00:08:46.320334 run osmo-stp_10.42.42.5(pid=1041): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1041)] 00:08:46.450986 run osmo-stp_10.42.42.5(pid=1041): stdout: | (launched: 2022-12-10_00:08:44.899350) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:08:46.580845 run osmo-stp_10.42.42.5(pid=1041): stderr: | �[0;m�[38;5;43m20221210000845092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000845092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000845093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000845093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000845093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000845094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000845094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:08:46.708138 run osmo-stp_10.42.42.5(pid=1041): stdout: | (launched: 2022-12-10_00:08:44.899350) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:08:46.832497 run osmo-stp_10.42.42.5(pid=1041): stderr: | �[0;m�[38;5;43m20221210000845092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210000845092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210000845093 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210000845093 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210000845093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210000845094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210000845094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:08:46.979297 run patchelf(pid=1044): Terminating (SIGINT) 00:08:47.149514 run patchelf(pid=1044): Terminated: ok {rc=0} 00:08:47.181762 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1041): Process ended prematurely: osmo-stp_10.42.42.5(pid=1041) [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1041)] [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8] 00:08:47.191827 tst iperf3.py:8: Test FAILED (7.6 sec) 00:08:47.252526 run osmo-hlr_10.42.42.2(pid=1038): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1038)] 00:08:47.300684 run osmo-hlr_10.42.42.2(pid=1038): stdout: | (launched: 2022-12-10_00:08:43.916631) 00:08:47.349349 run osmo-hlr_10.42.42.2(pid=1038): stderr: | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210000844114 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210000844127 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210000844135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210000844135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210000844135 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:08:47.390833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1033): Terminating (SIGTERM) 00:08:47.430125 run iperf3-srv_10.42.42.10(pid=1034): Terminating (SIGTERM) 00:08:47.471037 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1037): Terminating (SIGTERM) 00:08:47.509932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1040): Terminating (SIGTERM) 00:08:47.548785 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1043): Terminating (SIGTERM) 00:08:47.558010 --- ParallelTerminationStrategy: PID 1033 died... 00:08:47.610693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1033): Terminated: ok {rc=0} 00:08:47.620039 --- ParallelTerminationStrategy: PID 1034 died... 00:08:47.672119 run iperf3-srv_10.42.42.10(pid=1034): Terminated {rc=256} 00:08:47.681875 --- ParallelTerminationStrategy: PID 1037 died... 00:08:47.733586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1037): Terminated: ok {rc=0} 00:08:47.742955 --- ParallelTerminationStrategy: PID 1040 died... 00:08:47.794958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1040): Terminated: ok {rc=0} 00:08:47.804309 --- ParallelTerminationStrategy: PID 1043 died... 00:08:47.855967 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1043): Terminated: ok {rc=0} 00:08:47.939144 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1041): Process ended prematurely: osmo-stp_10.42.42.5(pid=1041) [trial-2366↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1041)]