Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31188): Process ended prematurely: osmo-stp_10.42.42.5(pid=31188) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31188)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 23:44:48.094329 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.106557 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:44:48.273162 tst iperf3.py: using LAC 24496 23:44:48.399689 tst iperf3.py: using RAC 16 23:44:48.524634 tst iperf3.py: using CellId 24496 23:44:48.650937 tst iperf3.py: using BVCI 24497 23:44:48.675576 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.687197 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.698592 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.710248 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.721961 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.733494 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.745274 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.756763 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:44:48.768432 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:44:49.045725 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:44:49.169395 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:44:49.475273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31180): Launched 23:44:49.730264 run iperf3-srv_10.42.42.10(pid=31181): Launched 23:44:49.910529 tst iperf3.py:8: start network... 23:44:50.034086 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:44:50.510323 run create_hlr_db(pid=31182): Launched 23:44:50.681901 bus /gobi_6: Setting Powered False 23:44:51.703943 run create_hlr_db(pid=31182): Terminated: ok {rc=0} 23:44:52.100000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31184): Launched 23:44:52.397529 run osmo-hlr_10.42.42.2(pid=31185): Launched 23:44:52.506647 run osmo-stp_10.42.42.5: Starting osmo-stp 23:44:53.021750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31187): Launched 23:44:53.318284 run osmo-stp_10.42.42.5(pid=31188): Launched 23:44:53.426506 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:44:53.942793 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31190): Launched 23:44:54.048455 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:44:54.307415 run patchelf(pid=31191): Launched 23:44:54.481204 run osmo-stp_10.42.42.5(pid=31188): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31188)] 23:44:54.609532 run osmo-stp_10.42.42.5(pid=31188): stdout: | (launched: 2022-12-09_23:44:53.172394) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:44:54.737669 run osmo-stp_10.42.42.5(pid=31188): stderr: | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209234453342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:44:54.861076 run osmo-stp_10.42.42.5(pid=31188): stdout: | (launched: 2022-12-09_23:44:53.172394) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:44:54.982841 run osmo-stp_10.42.42.5(pid=31188): stderr: | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209234453341 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209234453342 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209234453342 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:44:55.125524 run patchelf(pid=31191): Terminating (SIGINT) 23:44:55.293447 run patchelf(pid=31191): Terminated: ok {rc=0} 23:44:55.324265 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31188): Process ended prematurely: osmo-stp_10.42.42.5(pid=31188) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31188)] [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8] 23:44:55.333459 tst iperf3.py:8: Test FAILED (7.3 sec) 23:44:55.392557 run osmo-hlr_10.42.42.2(pid=31185): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31185)] 23:44:55.440896 run osmo-hlr_10.42.42.2(pid=31185): stdout: | (launched: 2022-12-09_23:44:52.251637) 23:44:55.490008 run osmo-hlr_10.42.42.2(pid=31185): stderr: | �[0;m�[1;31m20221209234452427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209234452428 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209234452428 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209234452428 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209234452428 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209234452428 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209234452440 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209234452449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209234452449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209234452449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:44:55.531850 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31180): Terminating (SIGTERM) 23:44:55.571033 run iperf3-srv_10.42.42.10(pid=31181): Terminating (SIGTERM) 23:44:55.610477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31184): Terminating (SIGTERM) 23:44:55.649842 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31187): Terminating (SIGTERM) 23:44:55.689027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31190): Terminating (SIGTERM) 23:44:55.697710 --- ParallelTerminationStrategy: PID 31180 died... 23:44:55.750105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31180): Terminated: ok {rc=0} 23:44:55.759638 --- ParallelTerminationStrategy: PID 31181 died... 23:44:55.811687 run iperf3-srv_10.42.42.10(pid=31181): Terminated {rc=256} 23:44:55.821114 --- ParallelTerminationStrategy: PID 31184 died... 23:44:55.873188 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31184): Terminated: ok {rc=0} 23:44:55.882695 --- ParallelTerminationStrategy: PID 31187 died... 23:44:55.934787 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31187): Terminated: ok {rc=0} 23:44:55.944124 --- ParallelTerminationStrategy: PID 31190 died... 23:44:55.996151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31190): Terminated: ok {rc=0} 23:44:56.084386 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31188): Process ended prematurely: osmo-stp_10.42.42.5(pid=31188) [trial-2366↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31188)]