Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 228 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]

Standard Output

----------------------------------------------
trial-2366 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
23:52:26.814915 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:26.826725 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
23:52:26.963200 tst                          ping.py: using LAC 24537
23:52:27.080078 tst                          ping.py: using RAC 57
23:52:27.199157 tst                          ping.py: using CellId 24537
23:52:27.317136 tst                          ping.py: using BVCI 24538
23:52:27.339906 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.350879 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.361649 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.372269 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.382838 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.393500 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.404232 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:52:27.414888 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
23:52:27.687414 tst                       ping.py:19: start network...
23:52:27.810717 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:52:28.283825 run         create_hlr_db(pid=31710): Launched
23:52:28.454830 bus                          /gobi_6: Setting Powered False
23:52:29.476299 run         create_hlr_db(pid=31710): Terminated: ok {rc=0}
23:52:29.869599 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Launched
23:52:30.163764 run   osmo-hlr_10.42.42.2(pid=31713): Launched
23:52:30.290297 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:52:30.814871 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Launched
23:52:31.246948 run   osmo-stp_10.42.42.5(pid=31716): Launched
23:52:31.527505 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:52:32.069608 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Launched
23:52:32.176190 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:52:32.448111 run              patchelf(pid=31719): Launched
23:52:32.619895 run   osmo-stp_10.42.42.5(pid=31716): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]
23:52:32.746244 run   osmo-stp_10.42.42.5(pid=31716): stdout: 
| (launched: 2022-12-09_23:52:30.980470)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:52:32.872669 run   osmo-stp_10.42.42.5(pid=31716): stderr: 
| �[0;m�[38;5;43m20221209235231355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209235231356 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209235231357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209235231359 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209235231365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209235231366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209235231366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:52:32.994749 run   osmo-stp_10.42.42.5(pid=31716): stdout: 
| (launched: 2022-12-09_23:52:30.980470)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:52:33.115841 run   osmo-stp_10.42.42.5(pid=31716): stderr: 
| �[0;m�[38;5;43m20221209235231355 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209235231356 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209235231357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209235231359 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209235231365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209235231366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209235231366 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:52:33.257231 run              patchelf(pid=31719): Terminating (SIGINT)
23:52:33.422806 run              patchelf(pid=31719): Terminated: ok {rc=0}
23:52:33.452819 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]  [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
23:52:33.461490 tst                       ping.py:22: Test FAILED (6.6 sec)
23:52:33.520924 run   osmo-hlr_10.42.42.2(pid=31713): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31713)]
23:52:33.569506 run   osmo-hlr_10.42.42.2(pid=31713): stdout: 
| (launched: 2022-12-09_23:52:30.019013) 
23:52:33.618886 run   osmo-hlr_10.42.42.2(pid=31713): stderr: 
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209235230194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209235230229 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209235230238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209235230238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209235230238 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:52:33.660868 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Terminating (SIGTERM)
23:52:33.700746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Terminating (SIGTERM)
23:52:33.740636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Terminating (SIGTERM)
23:52:33.750122 ---      ParallelTerminationStrategy: PID 31712 died...
23:52:33.803252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31712): Terminated: ok {rc=0}
23:52:33.813193 ---      ParallelTerminationStrategy: PID 31715 died...
23:52:33.866102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31715): Terminated: ok {rc=0}
23:52:33.875800 ---      ParallelTerminationStrategy: PID 31718 died...
23:52:33.928674 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31718): Terminated: ok {rc=0}
23:52:34.016807 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31716): Process ended prematurely: osmo-stp_10.42.42.5(pid=31716) [trial-2366↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31716)]