Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28933): Process ended prematurely: osmo-stp_10.42.42.5(pid=28933) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28933)]
Standard Output
---------------------------------------------- trial-2366 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 23:21:05.141908 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.154731 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:21:05.298231 tst ping.py: using LAC 24368 23:21:05.414164 tst ping.py: using RAC 143 23:21:05.536830 tst ping.py: using CellId 24368 23:21:05.659800 tst ping.py: using BVCI 24369 23:21:05.684217 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.695854 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.707437 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.718752 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.730225 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.741520 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.752883 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:05.764181 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:21:06.047034 tst ping.py:19: start network... 23:21:06.180130 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:21:06.678594 run create_hlr_db(pid=28927): Launched 23:21:06.847875 bus /gobi_6: Setting Powered False 23:21:07.869584 run create_hlr_db(pid=28927): Terminated: ok {rc=0} 23:21:08.258569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28929): Launched 23:21:08.551148 run osmo-hlr_10.42.42.2(pid=28930): Launched 23:21:08.657770 run osmo-stp_10.42.42.5: Starting osmo-stp 23:21:09.167234 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28932): Launched 23:21:09.458372 run osmo-stp_10.42.42.5(pid=28933): Launched 23:21:09.565741 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:21:10.074325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28935): Launched 23:21:10.178205 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:21:10.433038 run patchelf(pid=28936): Launched 23:21:10.603769 run osmo-stp_10.42.42.5(pid=28933): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28933)] 23:21:10.728609 run osmo-stp_10.42.42.5(pid=28933): stdout: | (launched: 2022-12-09_23:21:09.315137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:10.853816 run osmo-stp_10.42.42.5(pid=28933): stderr: | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232109485 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:10.974642 run osmo-stp_10.42.42.5(pid=28933): stdout: | (launched: 2022-12-09_23:21:09.315137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:11.094805 run osmo-stp_10.42.42.5(pid=28933): stderr: | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232109484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232109485 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232109485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:11.235039 run patchelf(pid=28936): Terminating (SIGINT) 23:21:11.398651 run patchelf(pid=28936): Terminated: ok {rc=0} 23:21:11.428364 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28933): Process ended prematurely: osmo-stp_10.42.42.5(pid=28933) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28933)] [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 23:21:11.436827 tst ping.py:22: Test FAILED (6.3 sec) 23:21:11.495946 run osmo-hlr_10.42.42.2(pid=28930): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28930)] 23:21:11.544438 run osmo-hlr_10.42.42.2(pid=28930): stdout: | (launched: 2022-12-09_23:21:08.407798) 23:21:11.593491 run osmo-hlr_10.42.42.2(pid=28930): stderr: | �[0;m�[1;31m20221209232108581 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232108582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232108582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232108582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232108582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232108582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232108594 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232108605 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232108605 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232108605 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:21:11.635548 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28929): Terminating (SIGTERM) 23:21:11.674931 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28932): Terminating (SIGTERM) 23:21:11.714329 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28935): Terminating (SIGTERM) 23:21:11.723537 --- ParallelTerminationStrategy: PID 28929 died... 23:21:11.776517 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28929): Terminated: ok {rc=0} 23:21:11.786089 --- ParallelTerminationStrategy: PID 28932 died... 23:21:11.839162 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28932): Terminated: ok {rc=0} 23:21:11.848698 --- ParallelTerminationStrategy: PID 28935 died... 23:21:11.902298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28935): Terminated: ok {rc=0} 23:21:11.992266 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28933): Process ended prematurely: osmo-stp_10.42.42.5(pid=28933) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28933)]