Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10633): Process ended prematurely: osmo-stp_10.42.42.5(pid=10633) [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10633)]
Standard Output
---------------------------------------------- trial-2367 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 01:50:42.473671 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:42.485219 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:50:42.641642 tst iperf3.py: using LAC 25156 01:50:42.767855 tst iperf3.py: using RAC 166 01:50:42.890358 tst iperf3.py: using CellId 25156 01:50:43.010317 tst iperf3.py: using BVCI 25157 01:50:43.033753 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.044774 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.055585 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.067236 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.078962 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.090841 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.102353 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.112750 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:50:43.124208 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:50:43.400078 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:50:43.525542 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:50:43.837408 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10625): Launched 01:50:44.097742 run iperf3-srv_10.42.42.10(pid=10626): Launched 01:50:44.280939 tst iperf3.py:8: start network... 01:50:44.406342 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:50:44.879293 run create_hlr_db(pid=10627): Launched 01:50:45.051577 bus /gobi_6: Setting Powered False 01:50:46.088861 run create_hlr_db(pid=10627): Terminated: ok {rc=0} 01:50:46.498111 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10629): Launched 01:50:46.921231 run osmo-hlr_10.42.42.2(pid=10630): Launched 01:50:47.064114 run osmo-stp_10.42.42.5: Starting osmo-stp 01:50:47.702784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10632): Launched 01:50:48.027394 run osmo-stp_10.42.42.5(pid=10633): Launched 01:50:48.146731 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:50:48.710588 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10635): Launched 01:50:48.825378 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:50:49.106748 run patchelf(pid=10636): Launched 01:50:49.294478 run osmo-stp_10.42.42.5(pid=10633): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10633)] 01:50:49.431411 run osmo-stp_10.42.42.5(pid=10633): stdout: | (launched: 2022-12-10_01:50:47.867351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:49.569484 run osmo-stp_10.42.42.5(pid=10633): stderr: | �[0;m�[38;5;43m20221210015048059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015048060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015048060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015048060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:49.703014 run osmo-stp_10.42.42.5(pid=10633): stdout: | (launched: 2022-12-10_01:50:47.867351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:49.834904 run osmo-stp_10.42.42.5(pid=10633): stderr: | �[0;m�[38;5;43m20221210015048059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015048060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015048060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015048060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015048061 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:49.987754 run patchelf(pid=10636): Terminating (SIGINT) 01:50:50.167342 run patchelf(pid=10636): Terminated: ok {rc=0} 01:50:50.200327 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10633): Process ended prematurely: osmo-stp_10.42.42.5(pid=10633) [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10633)] [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 01:50:50.210753 tst iperf3.py:8: Test FAILED (7.8 sec) 01:50:50.273677 run osmo-hlr_10.42.42.2(pid=10630): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10630)] 01:50:50.324756 run osmo-hlr_10.42.42.2(pid=10630): stdout: | (launched: 2022-12-10_01:50:46.653646) 01:50:50.376497 run osmo-hlr_10.42.42.2(pid=10630): stderr: | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210015046876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210015046892 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210015046911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210015046911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210015046911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:50:50.420911 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10625): Terminating (SIGTERM) 01:50:50.462569 run iperf3-srv_10.42.42.10(pid=10626): Terminating (SIGTERM) 01:50:50.504313 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10629): Terminating (SIGTERM) 01:50:50.545841 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10632): Terminating (SIGTERM) 01:50:50.588117 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10635): Terminating (SIGTERM) 01:50:50.598073 --- ParallelTerminationStrategy: PID 10625 died... 01:50:50.653816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10625): Terminated: ok {rc=0} 01:50:50.664087 --- ParallelTerminationStrategy: PID 10626 died... 01:50:50.719431 run iperf3-srv_10.42.42.10(pid=10626): Terminated {rc=256} 01:50:50.729599 --- ParallelTerminationStrategy: PID 10629 died... 01:50:50.785064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10629): Terminated: ok {rc=0} 01:50:50.795273 --- ParallelTerminationStrategy: PID 10632 died... 01:50:50.850993 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10632): Terminated: ok {rc=0} 01:50:50.861282 --- ParallelTerminationStrategy: PID 10635 died... 01:50:50.917189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10635): Terminated: ok {rc=0} 01:50:51.003743 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10633): Process ended prematurely: osmo-stp_10.42.42.5(pid=10633) [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10633)]