Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 229 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=6183): Process ended prematurely: osmo-stp_10.42.42.5(pid=6183) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6183)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
01:06:33.571820 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:33.583755 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
01:06:33.728831 tst                        iperf3.py: using LAC 24920
01:06:33.846601 tst                        iperf3.py: using RAC 185
01:06:33.961376 tst                        iperf3.py: using CellId 24920
01:06:34.075570 tst                        iperf3.py: using BVCI 24921
01:06:34.098295 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.109683 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.120810 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.132092 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.143483 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.154924 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.166420 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.177591 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:06:34.188904 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
01:06:34.479128 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:06:34.613368 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:06:34.943761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6175): Launched
01:06:35.220731 run iperf3-srv_10.42.42.10(pid=6176): Launched
01:06:35.416612 tst                      iperf3.py:8: start network...
01:06:35.549908 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:06:36.060239 run          create_hlr_db(pid=6177): Launched
01:06:36.245038 bus                          /gobi_6: Setting Powered False
01:06:37.266545 run          create_hlr_db(pid=6177): Terminated: ok {rc=0}
01:06:37.690620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6179): Launched
01:06:38.010829 run    osmo-hlr_10.42.42.2(pid=6180): Launched
01:06:38.126964 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:06:38.682719 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6182): Launched
01:06:39.003151 run    osmo-stp_10.42.42.5(pid=6183): Launched
01:06:39.118953 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:06:39.677211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6185): Launched
01:06:39.791442 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:06:40.070563 run               patchelf(pid=6186): Launched
01:06:40.257470 run    osmo-stp_10.42.42.5(pid=6183): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6183)]
01:06:40.393863 run    osmo-stp_10.42.42.5(pid=6183): stdout: 
| (launched: 2022-12-10_01:06:38.845203)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:06:40.530803 run    osmo-stp_10.42.42.5(pid=6183): stderr: 
| �[0;m�[38;5;43m20221210010639038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210010639038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210010639039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210010639039 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010639039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010639039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010639040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:06:40.663171 run    osmo-stp_10.42.42.5(pid=6183): stdout: 
| (launched: 2022-12-10_01:06:38.845203)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:06:40.794575 run    osmo-stp_10.42.42.5(pid=6183): stderr: 
| �[0;m�[38;5;43m20221210010639038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210010639038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210010639039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210010639039 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010639039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010639039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010639040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:06:40.947990 run               patchelf(pid=6186): Terminating (SIGINT)
01:06:41.126437 run               patchelf(pid=6186): Terminated: ok {rc=0}
01:06:41.159444 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6183): Process ended prematurely: osmo-stp_10.42.42.5(pid=6183) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6183)]  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
01:06:41.169201 tst                      iperf3.py:8: Test FAILED (7.6 sec)
01:06:41.232330 run    osmo-hlr_10.42.42.2(pid=6180): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6180)]
01:06:41.283710 run    osmo-hlr_10.42.42.2(pid=6180): stdout: 
| (launched: 2022-12-10_01:06:37.853300) 
01:06:41.335373 run    osmo-hlr_10.42.42.2(pid=6180): stderr: 
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210010638051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210010638063 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210010638071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210010638071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210010638071 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:06:41.379641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6175): Terminating (SIGTERM)
01:06:41.421216 run iperf3-srv_10.42.42.10(pid=6176): Terminating (SIGTERM)
01:06:41.462896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6179): Terminating (SIGTERM)
01:06:41.504605 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6182): Terminating (SIGTERM)
01:06:41.546366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6185): Terminating (SIGTERM)
01:06:41.556016 ---      ParallelTerminationStrategy: PID 6175 died...
01:06:41.611572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6175): Terminated: ok {rc=0}
01:06:41.622009 ---      ParallelTerminationStrategy: PID 6176 died...
01:06:41.677069 run iperf3-srv_10.42.42.10(pid=6176): Terminated {rc=256}
01:06:41.687152 ---      ParallelTerminationStrategy: PID 6179 died...
01:06:41.742374 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6179): Terminated: ok {rc=0}
01:06:41.752332 ---      ParallelTerminationStrategy: PID 6182 died...
01:06:41.807637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6182): Terminated: ok {rc=0}
01:06:41.817738 ---      ParallelTerminationStrategy: PID 6185 died...
01:06:41.873235 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6185): Terminated: ok {rc=0}
01:06:41.960592 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6183): Process ended prematurely: osmo-stp_10.42.42.5(pid=6183) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6183)]