Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 229 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9417): Process ended prematurely: osmo-stp_10.42.42.5(pid=9417) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9417)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
01:37:22.773007 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:22.785087 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:37:22.924922 tst                        iperf3.py: using LAC 25085
01:37:23.053788 tst                        iperf3.py: using RAC 95
01:37:23.176802 tst                        iperf3.py: using CellId 25085
01:37:23.309788 tst                        iperf3.py: using BVCI 25086
01:37:23.334005 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.345487 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.356606 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.367901 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.379049 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.390258 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.401508 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.412572 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:37:23.423835 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:37:23.697682 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:37:23.820200 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:37:24.125519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9409): Launched
01:37:24.380888 run iperf3-srv_10.42.42.10(pid=9410): Launched
01:37:24.559856 tst                      iperf3.py:8: start network...
01:37:24.681963 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:37:25.147694 run          create_hlr_db(pid=9411): Launched
01:37:25.317211 bus                          /gobi_6: Setting Powered False
01:37:26.339521 run          create_hlr_db(pid=9411): Terminated: ok {rc=0}
01:37:26.732528 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9413): Launched
01:37:27.029610 run    osmo-hlr_10.42.42.2(pid=9414): Launched
01:37:27.137598 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:37:27.649121 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9416): Launched
01:37:27.946832 run    osmo-stp_10.42.42.5(pid=9417): Launched
01:37:28.055015 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:37:28.569751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9419): Launched
01:37:28.674149 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:37:28.931501 run               patchelf(pid=9420): Launched
01:37:29.103935 run    osmo-stp_10.42.42.5(pid=9417): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9417)]
01:37:29.230396 run    osmo-stp_10.42.42.5(pid=9417): stdout: 
| (launched: 2022-12-10_01:37:27.799081)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:29.356710 run    osmo-stp_10.42.42.5(pid=9417): stderr: 
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210013727968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:29.478989 run    osmo-stp_10.42.42.5(pid=9417): stdout: 
| (launched: 2022-12-10_01:37:27.799081)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:37:29.599935 run    osmo-stp_10.42.42.5(pid=9417): stderr: 
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210013727968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210013727968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210013727969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:37:29.740445 run               patchelf(pid=9420): Terminating (SIGINT)
01:37:29.904862 run               patchelf(pid=9420): Terminated: ok {rc=0}
01:37:29.935423 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9417): Process ended prematurely: osmo-stp_10.42.42.5(pid=9417) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9417)]  [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
01:37:29.944429 tst                      iperf3.py:8: Test FAILED (7.2 sec)
01:37:30.004218 run    osmo-hlr_10.42.42.2(pid=9414): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9414)]
01:37:30.052564 run    osmo-hlr_10.42.42.2(pid=9414): stdout: 
| (launched: 2022-12-10_01:37:26.882652) 
01:37:30.101729 run    osmo-hlr_10.42.42.2(pid=9414): stderr: 
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210013727054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210013727066 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210013727077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210013727077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210013727077 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:37:30.143207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9409): Terminating (SIGTERM)
01:37:30.182577 run iperf3-srv_10.42.42.10(pid=9410): Terminating (SIGTERM)
01:37:30.222107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9413): Terminating (SIGTERM)
01:37:30.261469 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9416): Terminating (SIGTERM)
01:37:30.300833 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9419): Terminating (SIGTERM)
01:37:30.310209 ---      ParallelTerminationStrategy: PID 9409 died...
01:37:30.363728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9409): Terminated: ok {rc=0}
01:37:30.373250 ---      ParallelTerminationStrategy: PID 9410 died...
01:37:30.425502 run iperf3-srv_10.42.42.10(pid=9410): Terminated {rc=256}
01:37:30.435142 ---      ParallelTerminationStrategy: PID 9413 died...
01:37:30.487500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9413): Terminated: ok {rc=0}
01:37:30.497136 ---      ParallelTerminationStrategy: PID 9416 died...
01:37:30.549528 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9416): Terminated: ok {rc=0}
01:37:30.559620 ---      ParallelTerminationStrategy: PID 9419 died...
01:37:30.612350 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9419): Terminated: ok {rc=0}
01:37:30.694893 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9417): Process ended prematurely: osmo-stp_10.42.42.5(pid=9417) [trial-2367↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9417)]