Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 229 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7472): Process ended prematurely: osmo-stp_10.42.42.5(pid=7472) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7472)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
01:13:28.592644 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:28.604507 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
01:13:28.764627 tst                        iperf3.py: using LAC 24957
01:13:28.886830 tst                        iperf3.py: using RAC 222
01:13:29.008034 tst                        iperf3.py: using CellId 24957
01:13:29.135267 tst                        iperf3.py: using BVCI 24958
01:13:29.160352 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.171935 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.183536 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.196159 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.208164 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.219475 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.233985 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.245302 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:13:29.256357 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
01:13:29.553622 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:13:29.689644 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:13:30.026124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7464): Launched
01:13:30.306271 run iperf3-srv_10.42.42.10(pid=7465): Launched
01:13:30.506623 tst                      iperf3.py:8: start network...
01:13:30.642782 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:13:31.203629 run          create_hlr_db(pid=7466): Launched
01:13:31.385671 bus                          /gobi_6: Setting Powered False
01:13:32.402046 run          create_hlr_db(pid=7466): Terminated: ok {rc=0}
01:13:32.836927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7468): Launched
01:13:33.164408 run    osmo-hlr_10.42.42.2(pid=7469): Launched
01:13:33.286748 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:13:33.856590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7471): Launched
01:13:34.185263 run    osmo-stp_10.42.42.5(pid=7472): Launched
01:13:34.303529 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:13:34.873388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7474): Launched
01:13:34.989064 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:13:35.273559 run               patchelf(pid=7475): Launched
01:13:35.463944 run    osmo-stp_10.42.42.5(pid=7472): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7472)]
01:13:35.602788 run    osmo-stp_10.42.42.5(pid=7472): stdout: 
| (launched: 2022-12-10_01:13:34.022651)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:13:35.742142 run    osmo-stp_10.42.42.5(pid=7472): stderr: 
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210011334220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:13:35.877800 run    osmo-stp_10.42.42.5(pid=7472): stdout: 
| (launched: 2022-12-10_01:13:34.022651)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:13:36.011360 run    osmo-stp_10.42.42.5(pid=7472): stderr: 
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210011334219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210011334220 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210011334220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:13:36.166756 run               patchelf(pid=7475): Terminating (SIGINT)
01:13:36.348358 run               patchelf(pid=7475): Terminated: ok {rc=0}
01:13:36.381926 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7472): Process ended prematurely: osmo-stp_10.42.42.5(pid=7472) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7472)]  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
01:13:36.391771 tst                      iperf3.py:8: Test FAILED (7.8 sec)
01:13:36.455051 run    osmo-hlr_10.42.42.2(pid=7469): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7469)]
01:13:36.506428 run    osmo-hlr_10.42.42.2(pid=7469): stdout: 
| (launched: 2022-12-10_01:13:33.003567) 
01:13:36.558325 run    osmo-hlr_10.42.42.2(pid=7469): stderr: 
| �[0;m�[1;31m20221210011333204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210011333204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210011333204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210011333205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210011333205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210011333205 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210011333217 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210011333226 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210011333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210011333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:13:36.602708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7464): Terminating (SIGTERM)
01:13:36.644211 run iperf3-srv_10.42.42.10(pid=7465): Terminating (SIGTERM)
01:13:36.686354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7468): Terminating (SIGTERM)
01:13:36.727982 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7471): Terminating (SIGTERM)
01:13:36.769668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7474): Terminating (SIGTERM)
01:13:36.779274 ---      ParallelTerminationStrategy: PID 7464 died...
01:13:36.834618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7464): Terminated: ok {rc=0}
01:13:36.844525 ---      ParallelTerminationStrategy: PID 7465 died...
01:13:36.899775 run iperf3-srv_10.42.42.10(pid=7465): Terminated {rc=256}
01:13:36.909686 ---      ParallelTerminationStrategy: PID 7468 died...
01:13:36.964540 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7468): Terminated: ok {rc=0}
01:13:36.974816 ---      ParallelTerminationStrategy: PID 7471 died...
01:13:37.030028 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7471): Terminated: ok {rc=0}
01:13:37.039908 ---      ParallelTerminationStrategy: PID 7474 died...
01:13:37.095213 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7474): Terminated: ok {rc=0}
01:13:37.182334 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7472): Process ended prematurely: osmo-stp_10.42.42.5(pid=7472) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7472)]