Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8457): Process ended prematurely: osmo-stp_10.42.42.5(pid=8457) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8457)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 01:23:43.679204 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:43.691553 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:23:43.839450 tst iperf3.py: using LAC 25011 01:23:43.964577 tst iperf3.py: using RAC 21 01:23:44.090165 tst iperf3.py: using CellId 25011 01:23:44.212456 tst iperf3.py: using BVCI 25012 01:23:44.235501 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.247184 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.258541 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.270173 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.281640 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.292747 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.304563 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.315580 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:44.327020 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:44.617560 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 01:23:44.752189 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:45.083935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8449): Launched 01:23:45.362013 run iperf3-srv_10.42.42.10(pid=8450): Launched 01:23:45.558489 tst iperf3.py:8: start network... 01:23:45.691605 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:23:46.263909 run create_hlr_db(pid=8451): Launched 01:23:46.451806 bus /gobi_6: Setting Powered False 01:23:47.458881 run create_hlr_db(pid=8451): Terminated: ok {rc=0} 01:23:47.897507 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8453): Launched 01:23:48.219828 run osmo-hlr_10.42.42.2(pid=8454): Launched 01:23:48.341182 run osmo-stp_10.42.42.5: Starting osmo-stp 01:23:48.899167 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8456): Launched 01:23:49.220254 run osmo-stp_10.42.42.5(pid=8457): Launched 01:23:49.337247 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:23:49.898405 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8459): Launched 01:23:50.012221 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:23:50.294702 run patchelf(pid=8460): Launched 01:23:50.482583 run osmo-stp_10.42.42.5(pid=8457): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8457)] 01:23:50.619689 run osmo-stp_10.42.42.5(pid=8457): stdout: | (launched: 2022-12-10_01:23:49.062435) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:50.758358 run osmo-stp_10.42.42.5(pid=8457): stderr: | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012349258 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:50.891919 run osmo-stp_10.42.42.5(pid=8457): stdout: | (launched: 2022-12-10_01:23:49.062435) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:51.024096 run osmo-stp_10.42.42.5(pid=8457): stderr: | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012349257 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012349258 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012349258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:51.177438 run patchelf(pid=8460): Terminating (SIGINT) 01:23:51.356659 run patchelf(pid=8460): Terminated: ok {rc=0} 01:23:51.389740 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8457): Process ended prematurely: osmo-stp_10.42.42.5(pid=8457) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8457)] [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 01:23:51.399638 tst iperf3.py:8: Test FAILED (7.8 sec) 01:23:51.463739 run osmo-hlr_10.42.42.2(pid=8454): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8454)] 01:23:51.515462 run osmo-hlr_10.42.42.2(pid=8454): stdout: | (launched: 2022-12-10_01:23:48.061761) 01:23:51.567654 run osmo-hlr_10.42.42.2(pid=8454): stderr: | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210012348262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210012348274 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210012348282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210012348282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210012348282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:23:51.611862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8449): Terminating (SIGTERM) 01:23:51.653635 run iperf3-srv_10.42.42.10(pid=8450): Terminating (SIGTERM) 01:23:51.695826 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8453): Terminating (SIGTERM) 01:23:51.737465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8456): Terminating (SIGTERM) 01:23:51.779579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8459): Terminating (SIGTERM) 01:23:51.789774 --- ParallelTerminationStrategy: PID 8449 died... 01:23:51.845625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8449): Terminated: ok {rc=0} 01:23:51.856057 --- ParallelTerminationStrategy: PID 8450 died... 01:23:51.911373 run iperf3-srv_10.42.42.10(pid=8450): Terminated {rc=256} 01:23:51.921816 --- ParallelTerminationStrategy: PID 8453 died... 01:23:51.977795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8453): Terminated: ok {rc=0} 01:23:51.987705 --- ParallelTerminationStrategy: PID 8456 died... 01:23:52.043697 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8456): Terminated: ok {rc=0} 01:23:52.053735 --- ParallelTerminationStrategy: PID 8459 died... 01:23:52.109083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8459): Terminated: ok {rc=0} 01:23:52.196447 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8457): Process ended prematurely: osmo-stp_10.42.42.5(pid=8457) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8457)]