Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-umtrx.ping_idle_ping.py (from gprs_trx-umtrx)

Failing for the past 229 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7947): Process ended prematurely: osmo-stp_10.42.42.5(pid=7947) [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7947)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-umtrx ping_idle_ping.py
----------------------------------------------
01:20:21.148135 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.159745 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
01:20:21.294569 tst                ping_idle_ping.py: using LAC 24994
01:20:21.412458 tst                ping_idle_ping.py: using RAC 4
01:20:21.529818 tst                ping_idle_ping.py: using CellId 24994
01:20:21.650269 tst                ping_idle_ping.py: using BVCI 24995
01:20:21.672671 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.683221 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.693568 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.704068 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.714563 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.725069 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.735737 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
01:20:21.746299 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
01:20:22.016488 tst             ping_idle_ping.py:24: start network...
01:20:22.138208 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:20:22.604656 run          create_hlr_db(pid=7941): Launched
01:20:22.775367 bus                          /gobi_6: Setting Powered False
01:20:23.796200 run          create_hlr_db(pid=7941): Terminated: ok {rc=0}
01:20:24.191087 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7943): Launched
01:20:24.487902 run    osmo-hlr_10.42.42.2(pid=7944): Launched
01:20:24.595070 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:20:25.107178 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7946): Launched
01:20:25.401710 run    osmo-stp_10.42.42.5(pid=7947): Launched
01:20:25.508502 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:20:26.020277 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7949): Launched
01:20:26.124244 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:20:26.380817 run               patchelf(pid=7950): Launched
01:20:26.552237 run    osmo-stp_10.42.42.5(pid=7947): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7947)]
01:20:26.677814 run    osmo-stp_10.42.42.5(pid=7947): stdout: 
| (launched: 2022-12-10_01:20:25.256072)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:20:26.803470 run    osmo-stp_10.42.42.5(pid=7947): stderr: 
| �[0;m�[38;5;43m20221210012025426 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210012025426 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210012025427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210012025427 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:20:26.924699 run    osmo-stp_10.42.42.5(pid=7947): stdout: 
| (launched: 2022-12-10_01:20:25.256072)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:20:27.045539 run    osmo-stp_10.42.42.5(pid=7947): stderr: 
| �[0;m�[38;5;43m20221210012025426 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210012025426 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210012025427 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210012025427 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210012025428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:20:27.186013 run               patchelf(pid=7950): Terminating (SIGINT)
01:20:27.349858 run               patchelf(pid=7950): Terminated: ok {rc=0}
01:20:27.379690 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7947): Process ended prematurely: osmo-stp_10.42.42.5(pid=7947) [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7947)]  [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py:27]
01:20:27.388240 tst             ping_idle_ping.py:27: Test FAILED (6.2 sec)
01:20:27.448655 run    osmo-hlr_10.42.42.2(pid=7944): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7944)]
01:20:27.497549 run    osmo-hlr_10.42.42.2(pid=7944): stdout: 
| (launched: 2022-12-10_01:20:24.340719) 
01:20:27.546974 run    osmo-hlr_10.42.42.2(pid=7944): stderr: 
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210012024518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210012024553 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-umtrx/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210012024563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210012024563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210012024564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:20:27.589185 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7943): Terminating (SIGTERM)
01:20:27.628657 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7946): Terminating (SIGTERM)
01:20:27.668390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7949): Terminating (SIGTERM)
01:20:27.677917 ---      ParallelTerminationStrategy: PID 7943 died...
01:20:27.731729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7943): Terminated: ok {rc=0}
01:20:27.741460 ---      ParallelTerminationStrategy: PID 7946 died...
01:20:27.794262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7946): Terminated: ok {rc=0}
01:20:27.803975 ---      ParallelTerminationStrategy: PID 7949 died...
01:20:27.856707 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7949): Terminated: ok {rc=0}
01:20:27.940418 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7947): Process ended prematurely: osmo-stp_10.42.42.5(pid=7947) [trial-2367↪gprs:trx-umtrx↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7947)]