Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 229 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7539): Process ended prematurely: osmo-stp_10.42.42.5(pid=7539) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7539)]

Standard Output

----------------------------------------------
trial-2367 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
01:14:29.653264 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:29.665832 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:14:29.837297 tst                        iperf3.py: using LAC 24962
01:14:29.967712 tst                        iperf3.py: using RAC 227
01:14:30.090118 tst                        iperf3.py: using CellId 24962
01:14:30.210836 tst                        iperf3.py: using BVCI 24963
01:14:30.234504 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.245656 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.256896 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.268340 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.279939 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.291178 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.302533 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.314651 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:14:30.325722 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:14:30.620611 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:14:30.757036 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:14:31.127232 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7531): Launched
01:14:31.426383 run iperf3-srv_10.42.42.10(pid=7532): Launched
01:14:31.639288 tst                      iperf3.py:8: start network...
01:14:31.788604 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:14:32.319842 run          create_hlr_db(pid=7533): Launched
01:14:32.508337 bus                          /gobi_6: Setting Powered False
01:14:33.530802 run          create_hlr_db(pid=7533): Terminated: ok {rc=0}
01:14:33.941586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7535): Launched
01:14:34.248360 run    osmo-hlr_10.42.42.2(pid=7536): Launched
01:14:34.361042 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:14:34.892644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7538): Launched
01:14:35.199644 run    osmo-stp_10.42.42.5(pid=7539): Launched
01:14:35.311443 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:14:35.843670 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7541): Launched
01:14:35.952267 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:14:36.221170 run               patchelf(pid=7542): Launched
01:14:36.400656 run    osmo-stp_10.42.42.5(pid=7539): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7539)]
01:14:36.532036 run    osmo-stp_10.42.42.5(pid=7539): stdout: 
| (launched: 2022-12-10_01:14:35.048150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:14:36.663505 run    osmo-stp_10.42.42.5(pid=7539): stderr: 
| �[0;m�[38;5;43m20221210011435221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210011435221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210011435222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210011435222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:14:36.790711 run    osmo-stp_10.42.42.5(pid=7539): stdout: 
| (launched: 2022-12-10_01:14:35.048150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:14:36.917195 run    osmo-stp_10.42.42.5(pid=7539): stderr: 
| �[0;m�[38;5;43m20221210011435221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210011435221 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210011435222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210011435222 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210011435223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:14:37.063756 run               patchelf(pid=7542): Terminating (SIGINT)
01:14:37.235775 run               patchelf(pid=7542): Terminated: ok {rc=0}
01:14:37.267502 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7539): Process ended prematurely: osmo-stp_10.42.42.5(pid=7539) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7539)]  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
01:14:37.276922 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:14:37.338260 run    osmo-hlr_10.42.42.2(pid=7536): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7536)]
01:14:37.387546 run    osmo-hlr_10.42.42.2(pid=7536): stdout: 
| (launched: 2022-12-10_01:14:34.096697) 
01:14:37.437080 run    osmo-hlr_10.42.42.2(pid=7536): stderr: 
| �[0;m�[1;31m20221210011434275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210011434275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210011434275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210011434275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210011434275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210011434276 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210011434288 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210011434297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210011434297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210011434297 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:14:37.480077 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7531): Terminating (SIGTERM)
01:14:37.520806 run iperf3-srv_10.42.42.10(pid=7532): Terminating (SIGTERM)
01:14:37.560767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7535): Terminating (SIGTERM)
01:14:37.601081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7538): Terminating (SIGTERM)
01:14:37.641440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7541): Terminating (SIGTERM)
01:14:37.650725 ---      ParallelTerminationStrategy: PID 7531 died...
01:14:37.704033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7531): Terminated: ok {rc=0}
01:14:37.713747 ---      ParallelTerminationStrategy: PID 7532 died...
01:14:37.766981 run iperf3-srv_10.42.42.10(pid=7532): Terminated {rc=256}
01:14:37.776601 ---      ParallelTerminationStrategy: PID 7535 died...
01:14:37.830697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7535): Terminated: ok {rc=0}
01:14:37.840356 ---      ParallelTerminationStrategy: PID 7538 died...
01:14:37.893711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7538): Terminated: ok {rc=0}
01:14:37.903263 ---      ParallelTerminationStrategy: PID 7541 died...
01:14:37.956208 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7541): Terminated: ok {rc=0}
01:14:38.044881 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7539): Process ended prematurely: osmo-stp_10.42.42.5(pid=7539) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7539)]