Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18831): Process ended prematurely: osmo-stp_10.42.42.5(pid=18831) [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18831)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 03:19:35.020783 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.032529 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:19:35.190930 tst ping.py: using LAC 25624 03:19:35.306844 tst ping.py: using RAC 124 03:19:35.422329 tst ping.py: using CellId 25624 03:19:35.538776 tst ping.py: using BVCI 25625 03:19:35.561709 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.572613 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.583400 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.594510 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.605546 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.616497 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.627589 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:19:35.638538 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:19:35.912500 tst ping.py:19: start network... 03:19:36.036481 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:19:36.506129 run create_hlr_db(pid=18825): Launched 03:19:36.679105 bus /gobi_6: Setting Powered False 03:19:37.700379 run create_hlr_db(pid=18825): Terminated: ok {rc=0} 03:19:38.129162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18827): Launched 03:19:38.450908 run osmo-hlr_10.42.42.2(pid=18828): Launched 03:19:38.568569 run osmo-stp_10.42.42.5: Starting osmo-stp 03:19:39.126982 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18830): Launched 03:19:39.446114 run osmo-stp_10.42.42.5(pid=18831): Launched 03:19:39.562529 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:19:40.122810 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18833): Launched 03:19:40.237821 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:19:40.518290 run patchelf(pid=18834): Launched 03:19:40.705801 run osmo-stp_10.42.42.5(pid=18831): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18831)] 03:19:40.842575 run osmo-stp_10.42.42.5(pid=18831): stdout: | (launched: 2022-12-10_03:19:39.289859) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:19:40.979546 run osmo-stp_10.42.42.5(pid=18831): stderr: | �[0;m�[38;5;43m20221210031939482 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031939482 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031939483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031939483 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:19:41.112032 run osmo-stp_10.42.42.5(pid=18831): stdout: | (launched: 2022-12-10_03:19:39.289859) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:19:41.244055 run osmo-stp_10.42.42.5(pid=18831): stderr: | �[0;m�[38;5;43m20221210031939482 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031939482 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031939483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031939483 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031939485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:19:41.396845 run patchelf(pid=18834): Terminating (SIGINT) 03:19:41.576684 run patchelf(pid=18834): Terminated: ok {rc=0} 03:19:41.609299 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18831): Process ended prematurely: osmo-stp_10.42.42.5(pid=18831) [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18831)] [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22] 03:19:41.618371 tst ping.py:22: Test FAILED (6.6 sec) 03:19:41.681724 run osmo-hlr_10.42.42.2(pid=18828): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18828)] 03:19:41.733317 run osmo-hlr_10.42.42.2(pid=18828): stdout: | (launched: 2022-12-10_03:19:38.293167) 03:19:41.785762 run osmo-hlr_10.42.42.2(pid=18828): stderr: | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031938492 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031938504 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031938512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031938512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031938512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:19:41.830176 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18827): Terminating (SIGTERM) 03:19:41.872313 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18830): Terminating (SIGTERM) 03:19:41.914941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18833): Terminating (SIGTERM) 03:19:41.924758 --- ParallelTerminationStrategy: PID 18827 died... 03:19:41.980911 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18827): Terminated: ok {rc=0} 03:19:41.991208 --- ParallelTerminationStrategy: PID 18830 died... 03:19:42.047335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18830): Terminated: ok {rc=0} 03:19:42.057627 --- ParallelTerminationStrategy: PID 18833 died... 03:19:42.113406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18833): Terminated: ok {rc=0} 03:19:42.201108 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18831): Process ended prematurely: osmo-stp_10.42.42.5(pid=18831) [trial-2368↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18831)]