Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18764): Process ended prematurely: osmo-stp_10.42.42.5(pid=18764) [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18764)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 03:18:35.233853 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.246118 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 03:18:35.391574 tst ping.py: using LAC 25619 03:18:35.519635 tst ping.py: using RAC 119 03:18:35.646573 tst ping.py: using CellId 25619 03:18:35.771697 tst ping.py: using BVCI 25620 03:18:35.796073 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.807569 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.818889 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.830193 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.841373 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.852525 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.864033 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 03:18:35.875324 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 03:18:36.152465 tst ping.py:19: start network... 03:18:36.276267 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:18:36.787499 run create_hlr_db(pid=18752): Launched 03:18:36.982412 bus /gobi_6: Setting Powered False 03:18:37.992545 run create_hlr_db(pid=18752): Terminated: ok {rc=0} 03:18:38.426756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18760): Launched 03:18:38.726059 run osmo-hlr_10.42.42.2(pid=18761): Launched 03:18:38.844537 run osmo-stp_10.42.42.5: Starting osmo-stp 03:18:39.374875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18763): Launched 03:18:39.674608 run osmo-stp_10.42.42.5(pid=18764): Launched 03:18:39.787736 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:18:40.310545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18766): Launched 03:18:40.417044 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:18:40.681023 run patchelf(pid=18767): Launched 03:18:40.860570 run osmo-stp_10.42.42.5(pid=18764): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18764)] 03:18:40.989202 run osmo-stp_10.42.42.5(pid=18764): stdout: | (launched: 2022-12-10_03:18:39.525683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:18:41.129804 run osmo-stp_10.42.42.5(pid=18764): stderr: | �[0;m�[38;5;43m20221210031839699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031839699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031839700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031839700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:18:41.263677 run osmo-stp_10.42.42.5(pid=18764): stdout: | (launched: 2022-12-10_03:18:39.525683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:18:41.397494 run osmo-stp_10.42.42.5(pid=18764): stderr: | �[0;m�[38;5;43m20221210031839699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031839699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031839700 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031839700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031839701 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:18:41.553458 run patchelf(pid=18767): Terminating (SIGINT) 03:18:41.734121 run patchelf(pid=18767): Terminated: ok {rc=0} 03:18:41.766577 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18764): Process ended prematurely: osmo-stp_10.42.42.5(pid=18764) [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18764)] [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 03:18:41.775710 tst ping.py:22: Test FAILED (6.5 sec) 03:18:41.841263 run osmo-hlr_10.42.42.2(pid=18761): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18761)] 03:18:41.891185 run osmo-hlr_10.42.42.2(pid=18761): stdout: | (launched: 2022-12-10_03:18:38.578735) 03:18:41.941844 run osmo-hlr_10.42.42.2(pid=18761): stderr: | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031838755 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031838768 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031838778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031838779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031838779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:18:41.984639 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18760): Terminating (SIGTERM) 03:18:42.024814 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18763): Terminating (SIGTERM) 03:18:42.066953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18766): Terminating (SIGTERM) 03:18:42.076421 --- ParallelTerminationStrategy: PID 18760 died... 03:18:42.130457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18760): Terminated: ok {rc=0} 03:18:42.140151 --- ParallelTerminationStrategy: PID 18763 died... 03:18:42.193750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18763): Terminated: ok {rc=0} 03:18:42.203651 --- ParallelTerminationStrategy: PID 18766 died... 03:18:42.257409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18766): Terminated: ok {rc=0} 03:18:42.347360 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18764): Process ended prematurely: osmo-stp_10.42.42.5(pid=18764) [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18764)]