Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12758): Process ended prematurely: osmo-stp_10.42.42.5(pid=12758) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12758)]
Standard Output
---------------------------------------------- trial-2368 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 02:16:49.441799 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:49.453533 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:16:49.600447 tst ping.py: using LAC 25290 02:16:49.722863 tst ping.py: using RAC 45 02:16:49.845755 tst ping.py: using CellId 25290 02:16:49.966621 tst ping.py: using BVCI 25291 02:16:49.990347 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.001532 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.012330 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.023465 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.034454 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.045428 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.056532 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:50.067559 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:50.366963 tst ping.py:19: start network... 02:16:50.504361 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:51.032184 run create_hlr_db(pid=12752): Launched 02:16:51.223459 bus /gobi_6: Setting Powered False 02:16:52.243540 run create_hlr_db(pid=12752): Terminated: ok {rc=0} 02:16:52.661123 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12754): Launched 02:16:52.970495 run osmo-hlr_10.42.42.2(pid=12755): Launched 02:16:53.083106 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:53.624745 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12757): Launched 02:16:53.934817 run osmo-stp_10.42.42.5(pid=12758): Launched 02:16:54.047071 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:16:54.586966 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12760): Launched 02:16:54.696531 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:16:54.967984 run patchelf(pid=12761): Launched 02:16:55.149281 run osmo-stp_10.42.42.5(pid=12758): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12758)] 02:16:55.281329 run osmo-stp_10.42.42.5(pid=12758): stdout: | (launched: 2022-12-10_02:16:53.781189) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:55.414376 run osmo-stp_10.42.42.5(pid=12758): stderr: | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021653955 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:55.542370 run osmo-stp_10.42.42.5(pid=12758): stdout: | (launched: 2022-12-10_02:16:53.781189) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:55.669712 run osmo-stp_10.42.42.5(pid=12758): stderr: | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210021653955 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210021653955 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210021653956 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:55.816913 run patchelf(pid=12761): Terminating (SIGINT) 02:16:55.990450 run patchelf(pid=12761): Terminated: ok {rc=0} 02:16:56.022004 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12758): Process ended prematurely: osmo-stp_10.42.42.5(pid=12758) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12758)] [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 02:16:56.030844 tst ping.py:22: Test FAILED (6.6 sec) 02:16:56.093251 run osmo-hlr_10.42.42.2(pid=12755): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12755)] 02:16:56.144002 run osmo-hlr_10.42.42.2(pid=12755): stdout: | (launched: 2022-12-10_02:16:52.817646) 02:16:56.195328 run osmo-hlr_10.42.42.2(pid=12755): stderr: | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210021652999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210021653038 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210021653049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210021653049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210021653049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:16:56.238570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12754): Terminating (SIGTERM) 02:16:56.279559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12757): Terminating (SIGTERM) 02:16:56.320582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12760): Terminating (SIGTERM) 02:16:56.330257 --- ParallelTerminationStrategy: PID 12754 died... 02:16:56.385151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12754): Terminated: ok {rc=0} 02:16:56.395271 --- ParallelTerminationStrategy: PID 12757 died... 02:16:56.449665 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12757): Terminated: ok {rc=0} 02:16:56.459719 --- ParallelTerminationStrategy: PID 12760 died... 02:16:56.514330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12760): Terminated: ok {rc=0} 02:16:56.600834 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12758): Process ended prematurely: osmo-stp_10.42.42.5(pid=12758) [trial-2368↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12758)]