Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16387): Process ended prematurely: osmo-stp_10.42.42.5(pid=16387) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16387)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 02:56:54.569497 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:54.580672 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:56:54.727649 tst iperf3.py: using LAC 25504 02:56:54.849821 tst iperf3.py: using RAC 4 02:56:54.969327 tst iperf3.py: using CellId 25504 02:56:55.091754 tst iperf3.py: using BVCI 25505 02:56:55.115083 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.126004 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.136638 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.147581 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.158361 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.169072 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.180366 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.191088 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:56:55.202081 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:56:55.497422 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:56:55.633055 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:56:55.968343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16379): Launched 02:56:56.247626 run iperf3-srv_10.42.42.10(pid=16380): Launched 02:56:56.446579 tst iperf3.py:8: start network... 02:56:56.582844 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:56:57.102388 run create_hlr_db(pid=16381): Launched 02:56:57.296654 bus /gobi_6: Setting Powered False 02:56:58.310739 run create_hlr_db(pid=16381): Terminated: ok {rc=0} 02:56:58.719397 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16383): Launched 02:56:59.023730 run osmo-hlr_10.42.42.2(pid=16384): Launched 02:56:59.143277 run osmo-stp_10.42.42.5: Starting osmo-stp 02:56:59.678021 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16386): Launched 02:56:59.981925 run osmo-stp_10.42.42.5(pid=16387): Launched 02:57:00.100037 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:57:00.633200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16389): Launched 02:57:00.740752 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:57:01.013452 run patchelf(pid=16390): Launched 02:57:01.196134 run osmo-stp_10.42.42.5(pid=16387): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16387)] 02:57:01.329737 run osmo-stp_10.42.42.5(pid=16387): stdout: | (launched: 2022-12-10_02:56:59.831959) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:01.472028 run osmo-stp_10.42.42.5(pid=16387): stderr: | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025700002 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:01.655307 run osmo-stp_10.42.42.5(pid=16387): stdout: | (launched: 2022-12-10_02:56:59.831959) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:57:01.791683 run osmo-stp_10.42.42.5(pid=16387): stderr: | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025700001 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025700002 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025700002 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:57:01.943908 run patchelf(pid=16390): Terminating (SIGINT) 02:57:02.121853 run patchelf(pid=16390): Terminated: ok {rc=0} 02:57:02.154848 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16387): Process ended prematurely: osmo-stp_10.42.42.5(pid=16387) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16387)] [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 02:57:02.164977 tst iperf3.py:8: Test FAILED (7.6 sec) 02:57:02.230667 run osmo-hlr_10.42.42.2(pid=16384): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16384)] 02:57:02.283620 run osmo-hlr_10.42.42.2(pid=16384): stdout: | (launched: 2022-12-10_02:56:58.874186) 02:57:02.335031 run osmo-hlr_10.42.42.2(pid=16384): stderr: | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025659053 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025659065 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025659074 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025659075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025659075 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:57:02.377737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16379): Terminating (SIGTERM) 02:57:02.419135 run iperf3-srv_10.42.42.10(pid=16380): Terminating (SIGTERM) 02:57:02.460069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16383): Terminating (SIGTERM) 02:57:02.501178 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16386): Terminating (SIGTERM) 02:57:02.542132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16389): Terminating (SIGTERM) 02:57:02.552245 --- ParallelTerminationStrategy: PID 16379 died... 02:57:02.607370 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16379): Terminated: ok {rc=0} 02:57:02.617370 --- ParallelTerminationStrategy: PID 16380 died... 02:57:02.671773 run iperf3-srv_10.42.42.10(pid=16380): Terminated {rc=256} 02:57:02.682172 --- ParallelTerminationStrategy: PID 16383 died... 02:57:02.737115 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16383): Terminated: ok {rc=0} 02:57:02.746852 --- ParallelTerminationStrategy: PID 16386 died... 02:57:02.801269 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16386): Terminated: ok {rc=0} 02:57:02.811649 --- ParallelTerminationStrategy: PID 16389 died... 02:57:02.865987 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16389): Terminated: ok {rc=0} 02:57:02.955535 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16387): Process ended prematurely: osmo-stp_10.42.42.5(pid=16387) [trial-2368↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16387)]