Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15626): Process ended prematurely: osmo-stp_10.42.42.5(pid=15626) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15626)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-umtrx+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 02:49:59.988014 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:59.999438 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:50:00.154798 tst iperf3.py: using LAC 25467 02:50:00.281500 tst iperf3.py: using RAC 222 02:50:00.409984 tst iperf3.py: using CellId 25467 02:50:00.537992 tst iperf3.py: using BVCI 25468 02:50:00.562819 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.574289 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.585732 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.597001 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.608184 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.619612 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.631052 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.642278 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:50:00.653729 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:50:00.951922 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:50:01.089987 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:50:01.457058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15617): Launched 02:50:01.756915 run iperf3-srv_10.42.42.10(pid=15619): Launched 02:50:01.959293 tst iperf3.py:8: start network... 02:50:02.096803 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:50:02.617779 run create_hlr_db(pid=15620): Launched 02:50:02.803924 bus /gobi_6: Setting Powered False 02:50:03.824625 run create_hlr_db(pid=15620): Terminated: ok {rc=0} 02:50:04.228504 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15622): Launched 02:50:04.530092 run osmo-hlr_10.42.42.2(pid=15623): Launched 02:50:04.645952 run osmo-stp_10.42.42.5: Starting osmo-stp 02:50:05.179242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15625): Launched 02:50:05.481211 run osmo-stp_10.42.42.5(pid=15626): Launched 02:50:05.592014 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:50:06.115240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15628): Launched 02:50:06.222487 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:50:06.485631 run patchelf(pid=15629): Launched 02:50:06.662015 run osmo-stp_10.42.42.5(pid=15626): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15626)] 02:50:06.790866 run osmo-stp_10.42.42.5(pid=15626): stdout: | (launched: 2022-12-10_02:50:05.332432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:06.919674 run osmo-stp_10.42.42.5(pid=15626): stderr: | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025005503 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:07.044348 run osmo-stp_10.42.42.5(pid=15626): stdout: | (launched: 2022-12-10_02:50:05.332432) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:07.168413 run osmo-stp_10.42.42.5(pid=15626): stderr: | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210025005503 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210025005503 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210025005504 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:07.313259 run patchelf(pid=15629): Terminating (SIGINT) 02:50:07.482783 run patchelf(pid=15629): Terminated: ok {rc=0} 02:50:07.514094 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15626): Process ended prematurely: osmo-stp_10.42.42.5(pid=15626) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15626)] [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8] 02:50:07.523321 tst iperf3.py:8: Test FAILED (7.6 sec) 02:50:07.583737 run osmo-hlr_10.42.42.2(pid=15623): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15623)] 02:50:07.632643 run osmo-hlr_10.42.42.2(pid=15623): stdout: | (launched: 2022-12-10_02:50:04.382002) 02:50:07.682615 run osmo-hlr_10.42.42.2(pid=15623): stderr: | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210025004556 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210025004569 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-umtrx+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210025004578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210025004578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210025004579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:50:07.724614 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15617): Terminating (SIGTERM) 02:50:07.764524 run iperf3-srv_10.42.42.10(pid=15619): Terminating (SIGTERM) 02:50:07.804809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15622): Terminating (SIGTERM) 02:50:07.845156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15625): Terminating (SIGTERM) 02:50:07.884742 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15628): Terminating (SIGTERM) 02:50:07.894223 --- ParallelTerminationStrategy: PID 15617 died... 02:50:07.947965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15617): Terminated: ok {rc=0} 02:50:07.957632 --- ParallelTerminationStrategy: PID 15619 died... 02:50:08.010474 run iperf3-srv_10.42.42.10(pid=15619): Terminated {rc=256} 02:50:08.020327 --- ParallelTerminationStrategy: PID 15622 died... 02:50:08.073875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15622): Terminated: ok {rc=0} 02:50:08.083521 --- ParallelTerminationStrategy: PID 15625 died... 02:50:08.136689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15625): Terminated: ok {rc=0} 02:50:08.146343 --- ParallelTerminationStrategy: PID 15628 died... 02:50:08.199662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15628): Terminated: ok {rc=0} 02:50:08.288464 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15626): Process ended prematurely: osmo-stp_10.42.42.5(pid=15626) [trial-2368↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15626)]