Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28334): Process ended prematurely: osmo-stp_10.42.42.5(pid=28334) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28334)]
Standard Output
---------------------------------------------- trial-2369 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 04:44:44.619845 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:44.632092 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:44:44.779023 tst iperf3.py: using LAC 26078 04:44:44.900840 tst iperf3.py: using RAC 68 04:44:45.027069 tst iperf3.py: using CellId 26078 04:44:45.158671 tst iperf3.py: using BVCI 26079 04:44:45.183461 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.195097 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.206867 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.218296 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.229434 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.240597 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.251929 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.263168 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:44:45.274507 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:44:45.554388 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:44:45.681464 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:44:46.039029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28326): Launched 04:44:46.322660 run iperf3-srv_10.42.42.10(pid=28327): Launched 04:44:46.514356 tst iperf3.py:8: start network... 04:44:46.644315 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:44:47.187705 run create_hlr_db(pid=28328): Launched 04:44:47.380535 bus /gobi_6: Setting Powered False 04:44:48.399011 run create_hlr_db(pid=28328): Terminated: ok {rc=0} 04:44:48.805158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28330): Launched 04:44:49.108339 run osmo-hlr_10.42.42.2(pid=28331): Launched 04:44:49.227126 run osmo-stp_10.42.42.5: Starting osmo-stp 04:44:49.762835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28333): Launched 04:44:50.064919 run osmo-stp_10.42.42.5(pid=28334): Launched 04:44:50.175643 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:44:50.703972 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28336): Launched 04:44:50.812250 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:44:51.077731 run patchelf(pid=28337): Launched 04:44:51.255214 run osmo-stp_10.42.42.5(pid=28334): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28334)] 04:44:51.385057 run osmo-stp_10.42.42.5(pid=28334): stdout: | (launched: 2022-12-10_04:44:49.916103) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:44:51.515598 run osmo-stp_10.42.42.5(pid=28334): stderr: | �[0;m�[38;5;43m20221210044450085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044450086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044450086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044450086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:44:51.640789 run osmo-stp_10.42.42.5(pid=28334): stdout: | (launched: 2022-12-10_04:44:49.916103) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:44:51.765372 run osmo-stp_10.42.42.5(pid=28334): stderr: | �[0;m�[38;5;43m20221210044450085 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044450086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044450086 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044450086 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044450087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:44:51.910505 run patchelf(pid=28337): Terminating (SIGINT) 04:44:52.080339 run patchelf(pid=28337): Terminated: ok {rc=0} 04:44:52.111889 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28334): Process ended prematurely: osmo-stp_10.42.42.5(pid=28334) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28334)] [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 04:44:52.121382 tst iperf3.py:8: Test FAILED (7.5 sec) 04:44:52.182036 run osmo-hlr_10.42.42.2(pid=28331): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28331)] 04:44:52.231158 run osmo-hlr_10.42.42.2(pid=28331): stdout: | (launched: 2022-12-10_04:44:48.959003) 04:44:52.280765 run osmo-hlr_10.42.42.2(pid=28331): stderr: | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210044449135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210044449147 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210044449157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210044449157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210044449157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:44:52.322645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28326): Terminating (SIGTERM) 04:44:52.362628 run iperf3-srv_10.42.42.10(pid=28327): Terminating (SIGTERM) 04:44:52.402754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28330): Terminating (SIGTERM) 04:44:52.442779 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28333): Terminating (SIGTERM) 04:44:52.482818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28336): Terminating (SIGTERM) 04:44:52.492254 --- ParallelTerminationStrategy: PID 28326 died... 04:44:52.545576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28326): Terminated: ok {rc=0} 04:44:52.555585 --- ParallelTerminationStrategy: PID 28327 died... 04:44:52.608784 run iperf3-srv_10.42.42.10(pid=28327): Terminated {rc=256} 04:44:52.618778 --- ParallelTerminationStrategy: PID 28330 died... 04:44:52.672388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28330): Terminated: ok {rc=0} 04:44:52.682302 --- ParallelTerminationStrategy: PID 28333 died... 04:44:52.736100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28333): Terminated: ok {rc=0} 04:44:52.745831 --- ParallelTerminationStrategy: PID 28336 died... 04:44:52.799739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28336): Terminated: ok {rc=0} 04:44:52.888356 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28334): Process ended prematurely: osmo-stp_10.42.42.5(pid=28334) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28334)]