Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28367): Process ended prematurely: osmo-stp_10.42.42.5(pid=28367) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28367)]
Standard Output
---------------------------------------------- trial-2369 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 04:45:14.360416 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.372111 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:45:14.507672 tst ping.py: using LAC 26080 04:45:14.629623 tst ping.py: using RAC 70 04:45:14.744098 tst ping.py: using CellId 26080 04:45:14.858506 tst ping.py: using BVCI 26081 04:45:14.881133 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.892038 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.902943 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.913994 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.924989 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.935928 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.947114 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:45:14.958352 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:45:15.229318 tst ping.py:19: start network... 04:45:15.352402 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:45:15.819864 run create_hlr_db(pid=28361): Launched 04:45:16.009990 bus /gobi_6: Setting Powered False 04:45:17.054121 run create_hlr_db(pid=28361): Terminated: ok {rc=0} 04:45:17.486273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28363): Launched 04:45:17.803186 run osmo-hlr_10.42.42.2(pid=28364): Launched 04:45:17.918948 run osmo-stp_10.42.42.5: Starting osmo-stp 04:45:18.470626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28366): Launched 04:45:18.787171 run osmo-stp_10.42.42.5(pid=28367): Launched 04:45:18.901791 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:45:19.455590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28369): Launched 04:45:19.568865 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:45:19.845776 run patchelf(pid=28370): Launched 04:45:20.031246 run osmo-stp_10.42.42.5(pid=28367): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28367)] 04:45:20.167136 run osmo-stp_10.42.42.5(pid=28367): stdout: | (launched: 2022-12-10_04:45:18.631434) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:20.302900 run osmo-stp_10.42.42.5(pid=28367): stderr: | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044518827 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:20.434377 run osmo-stp_10.42.42.5(pid=28367): stdout: | (launched: 2022-12-10_04:45:18.631434) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:20.564498 run osmo-stp_10.42.42.5(pid=28367): stderr: | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210044518826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210044518827 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210044518827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:20.717211 run patchelf(pid=28370): Terminating (SIGINT) 04:45:20.894605 run patchelf(pid=28370): Terminated: ok {rc=0} 04:45:20.927071 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28367): Process ended prematurely: osmo-stp_10.42.42.5(pid=28367) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28367)] [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 04:45:20.936516 tst ping.py:22: Test FAILED (6.6 sec) 04:45:20.999127 run osmo-hlr_10.42.42.2(pid=28364): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28364)] 04:45:21.049975 run osmo-hlr_10.42.42.2(pid=28364): stdout: | (launched: 2022-12-10_04:45:17.647464) 04:45:21.101481 run osmo-hlr_10.42.42.2(pid=28364): stderr: | �[0;m�[1;31m20221210044517845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210044517846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210044517846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210044517846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210044517846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210044517846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210044517859 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210044517867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210044517867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210044517867 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:45:21.145535 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28363): Terminating (SIGTERM) 04:45:21.186884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28366): Terminating (SIGTERM) 04:45:21.228129 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28369): Terminating (SIGTERM) 04:45:21.237817 --- ParallelTerminationStrategy: PID 28363 died... 04:45:21.293560 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28363): Terminated: ok {rc=0} 04:45:21.303759 --- ParallelTerminationStrategy: PID 28366 died... 04:45:21.359534 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28366): Terminated: ok {rc=0} 04:45:21.369695 --- ParallelTerminationStrategy: PID 28369 died... 04:45:21.424836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28369): Terminated: ok {rc=0} 04:45:21.511511 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28367): Process ended prematurely: osmo-stp_10.42.42.5(pid=28367) [trial-2369↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28367)]