Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=23776): Process ended prematurely: osmo-stp_10.42.42.5(pid=23776) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23776)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 03:59:21.542455 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:21.554502 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:59:21.718794 tst ping.py: using LAC 25834 03:59:21.843059 tst ping.py: using RAC 79 03:59:21.958990 tst ping.py: using CellId 25834 03:59:22.074460 tst ping.py: using BVCI 25835 03:59:22.097436 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.108402 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.119178 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.130744 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.142020 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.153655 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.165127 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:22.176597 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:59:22.451257 tst ping.py:19: start network... 03:59:22.576128 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:59:23.048931 run create_hlr_db(pid=23770): Launched 03:59:23.222895 bus /gobi_6: Setting Powered False 03:59:24.243278 run create_hlr_db(pid=23770): Terminated: ok {rc=0} 03:59:24.667107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23772): Launched 03:59:24.986801 run osmo-hlr_10.42.42.2(pid=23773): Launched 03:59:25.104404 run osmo-stp_10.42.42.5: Starting osmo-stp 03:59:25.660803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23775): Launched 03:59:25.980278 run osmo-stp_10.42.42.5(pid=23776): Launched 03:59:26.096507 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:59:26.653886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23778): Launched 03:59:26.768454 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:59:27.047017 run patchelf(pid=23779): Launched 03:59:27.233998 run osmo-stp_10.42.42.5(pid=23776): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23776)] 03:59:27.371061 run osmo-stp_10.42.42.5(pid=23776): stdout: | (launched: 2022-12-10_03:59:25.823196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:27.507705 run osmo-stp_10.42.42.5(pid=23776): stderr: | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035926015 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:27.639541 run osmo-stp_10.42.42.5(pid=23776): stdout: | (launched: 2022-12-10_03:59:25.823196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:27.770352 run osmo-stp_10.42.42.5(pid=23776): stderr: | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035926014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035926015 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035926017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:27.922250 run patchelf(pid=23779): Terminating (SIGINT) 03:59:28.101232 run patchelf(pid=23779): Terminated: ok {rc=0} 03:59:28.133899 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23776): Process ended prematurely: osmo-stp_10.42.42.5(pid=23776) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23776)] [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22] 03:59:28.143378 tst ping.py:22: Test FAILED (6.6 sec) 03:59:28.206213 run osmo-hlr_10.42.42.2(pid=23773): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23773)] 03:59:28.257448 run osmo-hlr_10.42.42.2(pid=23773): stdout: | (launched: 2022-12-10_03:59:24.830050) 03:59:28.309318 run osmo-hlr_10.42.42.2(pid=23773): stderr: | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035925029 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035925042 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035925050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035925050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035925050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:59:28.354015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23772): Terminating (SIGTERM) 03:59:28.395926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23775): Terminating (SIGTERM) 03:59:28.437534 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23778): Terminating (SIGTERM) 03:59:28.447234 --- ParallelTerminationStrategy: PID 23772 died... 03:59:28.503186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23772): Terminated: ok {rc=0} 03:59:28.513603 --- ParallelTerminationStrategy: PID 23775 died... 03:59:28.569475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23775): Terminated: ok {rc=0} 03:59:28.579661 --- ParallelTerminationStrategy: PID 23778 died... 03:59:28.635225 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23778): Terminated: ok {rc=0} 03:59:28.722155 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23776): Process ended prematurely: osmo-stp_10.42.42.5(pid=23776) [trial-2369↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23776)]