Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=23651): Process ended prematurely: osmo-stp_10.42.42.5(pid=23651) [trial-2369↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23651)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 03:57:30.502622 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:30.514605 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 03:57:30.659690 tst ping_idle_ping.py: using LAC 25825 03:57:30.784836 tst ping_idle_ping.py: using RAC 70 03:57:30.916153 tst ping_idle_ping.py: using CellId 25825 03:57:31.048619 tst ping_idle_ping.py: using BVCI 25826 03:57:31.072566 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.084122 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.095963 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.108151 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.120505 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.133095 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.145171 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 03:57:31.158556 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 03:57:31.458693 tst ping_idle_ping.py:24: start network... 03:57:31.598724 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:57:32.153119 run create_hlr_db(pid=23645): Launched 03:57:32.341759 bus /gobi_6: Setting Powered False 03:57:33.360141 run create_hlr_db(pid=23645): Terminated: ok {rc=0} 03:57:33.763184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23647): Launched 03:57:34.062149 run osmo-hlr_10.42.42.2(pid=23648): Launched 03:57:34.179302 run osmo-stp_10.42.42.5: Starting osmo-stp 03:57:34.702605 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23650): Launched 03:57:35.001738 run osmo-stp_10.42.42.5(pid=23651): Launched 03:57:35.111181 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:57:35.631528 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23653): Launched 03:57:35.737810 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:57:36.004134 run patchelf(pid=23654): Launched 03:57:36.179517 run osmo-stp_10.42.42.5(pid=23651): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23651)] 03:57:36.307570 run osmo-stp_10.42.42.5(pid=23651): stdout: | (launched: 2022-12-10_03:57:34.854238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:36.436539 run osmo-stp_10.42.42.5(pid=23651): stderr: | �[0;m�[38;5;43m20221210035735024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035735025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035735025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035735025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:36.560272 run osmo-stp_10.42.42.5(pid=23651): stdout: | (launched: 2022-12-10_03:57:34.854238) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:57:36.683428 run osmo-stp_10.42.42.5(pid=23651): stderr: | �[0;m�[38;5;43m20221210035735024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210035735025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210035735025 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210035735025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210035735026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:57:36.826548 run patchelf(pid=23654): Terminating (SIGINT) 03:57:36.994614 run patchelf(pid=23654): Terminated: ok {rc=0} 03:57:37.025285 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=23651): Process ended prematurely: osmo-stp_10.42.42.5(pid=23651) [trial-2369↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23651)] [trial-2369↪gprs:trx-b200↪ping_idle_ping.py:27] 03:57:37.034235 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 03:57:37.094225 run osmo-hlr_10.42.42.2(pid=23648): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23648)] 03:57:37.142500 run osmo-hlr_10.42.42.2(pid=23648): stdout: | (launched: 2022-12-10_03:57:33.915438) 03:57:37.191553 run osmo-hlr_10.42.42.2(pid=23648): stderr: | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210035734093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210035734105 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210035734115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210035734115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210035734116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:57:37.233077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23647): Terminating (SIGTERM) 03:57:37.272499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23650): Terminating (SIGTERM) 03:57:37.312198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23653): Terminating (SIGTERM) 03:57:37.321483 --- ParallelTerminationStrategy: PID 23647 died... 03:57:37.374947 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23647): Terminated: ok {rc=0} 03:57:37.384431 --- ParallelTerminationStrategy: PID 23650 died... 03:57:37.437111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23650): Terminated: ok {rc=0} 03:57:37.446675 --- ParallelTerminationStrategy: PID 23653 died... 03:57:37.499868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23653): Terminated: ok {rc=0} 03:57:37.586258 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23651): Process ended prematurely: osmo-stp_10.42.42.5(pid=23651) [trial-2369↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23651)]