Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26051): Process ended prematurely: osmo-stp_10.42.42.5(pid=26051) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26051)]
Standard Output
---------------------------------------------- trial-2369 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 04:23:33.004064 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.016675 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:23:33.161200 tst iperf3.py: using LAC 25965 04:23:33.285219 tst iperf3.py: using RAC 210 04:23:33.409136 tst iperf3.py: using CellId 25965 04:23:33.533734 tst iperf3.py: using BVCI 25966 04:23:33.558312 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.570572 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.583223 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.596199 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.609047 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.620648 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.634044 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.647952 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:23:33.660929 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:23:33.950742 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:23:34.082219 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:23:34.425648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26042): Launched 04:23:34.718421 run iperf3-srv_10.42.42.10(pid=26043): Launched 04:23:34.911483 tst iperf3.py:8: start network... 04:23:35.044302 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:23:35.584637 run create_hlr_db(pid=26044): Launched 04:23:35.777376 bus /gobi_6: Setting Powered False 04:23:36.789356 run create_hlr_db(pid=26044): Terminated: ok {rc=0} 04:23:37.229985 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26046): Launched 04:23:37.656182 run osmo-hlr_10.42.42.2(pid=26047): Launched 04:23:37.885596 run osmo-stp_10.42.42.5: Starting osmo-stp 04:23:38.481783 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26049): Launched 04:23:38.807924 run osmo-stp_10.42.42.5(pid=26051): Launched 04:23:38.925154 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:23:39.487961 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26053): Launched 04:23:39.603041 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:23:39.883078 run patchelf(pid=26054): Launched 04:23:40.072052 run osmo-stp_10.42.42.5(pid=26051): ERR: Terminated: ERROR {rc=1} [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26051)] 04:23:40.210297 run osmo-stp_10.42.42.5(pid=26051): stdout: | (launched: 2022-12-10_04:23:38.649311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:23:40.348363 run osmo-stp_10.42.42.5(pid=26051): stderr: | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210042338841 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:23:40.482024 run osmo-stp_10.42.42.5(pid=26051): stdout: | (launched: 2022-12-10_04:23:38.649311) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:23:40.613648 run osmo-stp_10.42.42.5(pid=26051): stderr: | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210042338840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210042338841 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210042338841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:23:40.767173 run patchelf(pid=26054): Terminating (SIGINT) 04:23:40.947512 run patchelf(pid=26054): Terminated: ok {rc=0} 04:23:40.980701 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26051): Process ended prematurely: osmo-stp_10.42.42.5(pid=26051) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26051)] [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 04:23:40.991008 tst iperf3.py:8: Test FAILED (8.0 sec) 04:23:41.053302 run osmo-hlr_10.42.42.2(pid=26047): ERR: Terminated: ERROR {rc=237} [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26047)] 04:23:41.104444 run osmo-hlr_10.42.42.2(pid=26047): stdout: | (launched: 2022-12-10_04:23:37.398114) 04:23:41.156091 run osmo-hlr_10.42.42.2(pid=26047): stderr: | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210042337705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210042337727 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210042337744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210042337744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210042337744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:23:41.200368 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26042): Terminating (SIGTERM) 04:23:41.242273 run iperf3-srv_10.42.42.10(pid=26043): Terminating (SIGTERM) 04:23:41.283593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26046): Terminating (SIGTERM) 04:23:41.325479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26049): Terminating (SIGTERM) 04:23:41.367495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26053): Terminating (SIGTERM) 04:23:41.377409 --- ParallelTerminationStrategy: PID 26042 died... 04:23:41.433435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26042): Terminated: ok {rc=0} 04:23:41.443667 --- ParallelTerminationStrategy: PID 26043 died... 04:23:41.499187 run iperf3-srv_10.42.42.10(pid=26043): Terminated {rc=256} 04:23:41.509397 --- ParallelTerminationStrategy: PID 26046 died... 04:23:41.564795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26046): Terminated: ok {rc=0} 04:23:41.574941 --- ParallelTerminationStrategy: PID 26049 died... 04:23:41.630782 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26049): Terminated: ok {rc=0} 04:23:41.641042 --- ParallelTerminationStrategy: PID 26053 died... 04:23:41.696928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26053): Terminated: ok {rc=0} 04:23:41.785373 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26051): Process ended prematurely: osmo-stp_10.42.42.5(pid=26051) [trial-2369↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26051)]