Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5568): Process ended prematurely: osmo-stp_10.42.42.5(pid=5568) [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5568)]
Standard Output
---------------------------------------------- trial-2370 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 06:33:22.929845 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:22.943249 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 06:33:23.092193 tst ping.py: using LAC 26513 06:33:23.213671 tst ping.py: using RAC 248 06:33:23.334582 tst ping.py: using CellId 26513 06:33:23.455236 tst ping.py: using BVCI 26514 06:33:23.479373 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.491050 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.502478 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.513921 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.525247 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.536580 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.548085 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 06:33:23.559493 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 06:33:23.825839 tst ping.py:19: start network... 06:33:23.945944 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:33:24.400648 run create_hlr_db(pid=5562): Launched 06:33:24.567514 bus /gobi_6: Setting Powered False 06:33:25.588145 run create_hlr_db(pid=5562): Terminated: ok {rc=0} 06:33:26.004224 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5564): Launched 06:33:26.315070 run osmo-hlr_10.42.42.2(pid=5565): Launched 06:33:26.430217 run osmo-stp_10.42.42.5: Starting osmo-stp 06:33:26.947179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5567): Launched 06:33:27.234977 run osmo-stp_10.42.42.5(pid=5568): Launched 06:33:27.339930 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:33:27.843321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5570): Launched 06:33:27.945572 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:33:28.197846 run patchelf(pid=5571): Launched 06:33:28.366934 run osmo-stp_10.42.42.5(pid=5568): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5568)] 06:33:28.490750 run osmo-stp_10.42.42.5(pid=5568): stdout: | (launched: 2022-12-10_06:33:27.092865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:33:28.614961 run osmo-stp_10.42.42.5(pid=5568): stderr: | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063327263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:33:28.734455 run osmo-stp_10.42.42.5(pid=5568): stdout: | (launched: 2022-12-10_06:33:27.092865) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:33:28.852730 run osmo-stp_10.42.42.5(pid=5568): stderr: | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210063327262 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210063327263 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210063327263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:33:28.990680 run patchelf(pid=5571): Terminating (SIGINT) 06:33:29.152237 run patchelf(pid=5571): Terminated: ok {rc=0} 06:33:29.181849 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=5568): Process ended prematurely: osmo-stp_10.42.42.5(pid=5568) [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5568)] [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22] 06:33:29.190409 tst ping.py:22: Test FAILED (6.3 sec) 06:33:29.249861 run osmo-hlr_10.42.42.2(pid=5565): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5565)] 06:33:29.297948 run osmo-hlr_10.42.42.2(pid=5565): stdout: | (launched: 2022-12-10_06:33:26.161931) 06:33:29.346880 run osmo-hlr_10.42.42.2(pid=5565): stderr: | �[0;m�[1;31m20221210063326359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210063326360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210063326360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210063326360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210063326360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210063326360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210063326371 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210063326379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210063326380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210063326380 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:33:29.387955 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5564): Terminating (SIGTERM) 06:33:29.426929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5567): Terminating (SIGTERM) 06:33:29.466087 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5570): Terminating (SIGTERM) 06:33:29.475503 --- ParallelTerminationStrategy: PID 5564 died... 06:33:29.527976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5564): Terminated: ok {rc=0} 06:33:29.537873 --- ParallelTerminationStrategy: PID 5567 died... 06:33:29.590051 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5567): Terminated: ok {rc=0} 06:33:29.599783 --- ParallelTerminationStrategy: PID 5570 died... 06:33:29.652372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5570): Terminated: ok {rc=0} 06:33:29.739092 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5568): Process ended prematurely: osmo-stp_10.42.42.5(pid=5568) [trial-2370↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5568)]