Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31303): Process ended prematurely: osmo-stp_10.42.42.5(pid=31303) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31303)]
Standard Output
---------------------------------------------- trial-2370 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 05:37:16.971091 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:16.984155 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:37:17.136555 tst ping.py: using LAC 26212 05:37:17.265014 tst ping.py: using RAC 202 05:37:17.384049 tst ping.py: using CellId 26212 05:37:17.504606 tst ping.py: using BVCI 26213 05:37:17.527853 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.539149 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.550004 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.561630 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.572827 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.584109 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.595146 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:37:17.606271 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:37:17.880760 tst ping.py:19: start network... 05:37:18.005497 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:37:18.477171 run create_hlr_db(pid=31297): Launched 05:37:18.650580 bus /gobi_6: Setting Powered False 05:37:19.671854 run create_hlr_db(pid=31297): Terminated: ok {rc=0} 05:37:20.101008 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31299): Launched 05:37:20.423609 run osmo-hlr_10.42.42.2(pid=31300): Launched 05:37:20.540796 run osmo-stp_10.42.42.5: Starting osmo-stp 05:37:21.102499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31302): Launched 05:37:21.426634 run osmo-stp_10.42.42.5(pid=31303): Launched 05:37:21.543239 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:37:22.105968 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31305): Launched 05:37:22.219361 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:37:22.501940 run patchelf(pid=31306): Launched 05:37:22.689851 run osmo-stp_10.42.42.5(pid=31303): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31303)] 05:37:22.826841 run osmo-stp_10.42.42.5(pid=31303): stdout: | (launched: 2022-12-10_05:37:21.265051) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:37:22.963874 run osmo-stp_10.42.42.5(pid=31303): stderr: | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210053721462 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:37:23.096314 run osmo-stp_10.42.42.5(pid=31303): stdout: | (launched: 2022-12-10_05:37:21.265051) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:37:23.227015 run osmo-stp_10.42.42.5(pid=31303): stderr: | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210053721461 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210053721462 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210053721462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:37:23.379248 run patchelf(pid=31306): Terminating (SIGINT) 05:37:23.558065 run patchelf(pid=31306): Terminated: ok {rc=0} 05:37:23.590838 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=31303): Process ended prematurely: osmo-stp_10.42.42.5(pid=31303) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31303)] [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 05:37:23.600073 tst ping.py:22: Test FAILED (6.6 sec) 05:37:23.663390 run osmo-hlr_10.42.42.2(pid=31300): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31300)] 05:37:23.714892 run osmo-hlr_10.42.42.2(pid=31300): stdout: | (launched: 2022-12-10_05:37:20.263965) 05:37:23.766931 run osmo-hlr_10.42.42.2(pid=31300): stderr: | �[0;m�[1;31m20221210053720464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210053720464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210053720464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210053720464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210053720464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210053720465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210053720479 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210053720489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210053720489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210053720489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:37:23.811393 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31299): Terminating (SIGTERM) 05:37:23.853213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31302): Terminating (SIGTERM) 05:37:23.895043 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31305): Terminating (SIGTERM) 05:37:23.904714 --- ParallelTerminationStrategy: PID 31299 died... 05:37:23.960546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31299): Terminated: ok {rc=0} 05:37:23.970610 --- ParallelTerminationStrategy: PID 31302 died... 05:37:24.026071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31302): Terminated: ok {rc=0} 05:37:24.036036 --- ParallelTerminationStrategy: PID 31305 died... 05:37:24.091619 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31305): Terminated: ok {rc=0} 05:37:24.179627 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31303): Process ended prematurely: osmo-stp_10.42.42.5(pid=31303) [trial-2370↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31303)]