Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=32533): Process ended prematurely: osmo-stp_10.42.42.5(pid=32533) [trial-2370↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32533)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 05:50:56.597591 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:56.609047 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 05:50:56.746815 tst ping_idle_ping.py: using LAC 26286 05:50:56.864387 tst ping_idle_ping.py: using RAC 21 05:50:56.982322 tst ping_idle_ping.py: using CellId 26286 05:50:57.103666 tst ping_idle_ping.py: using BVCI 26287 05:50:57.126677 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.137375 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.147866 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.159317 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.170566 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.181784 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.193315 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:57.204730 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:57.486775 tst ping_idle_ping.py:24: start network... 05:50:57.612502 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:50:58.089580 run create_hlr_db(pid=32527): Launched 05:50:58.263031 bus /gobi_6: Setting Powered False 05:50:59.284762 run create_hlr_db(pid=32527): Terminated: ok {rc=0} 05:50:59.713282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32529): Launched 05:51:00.037342 run osmo-hlr_10.42.42.2(pid=32530): Launched 05:51:00.156133 run osmo-stp_10.42.42.5: Starting osmo-stp 05:51:00.714711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32532): Launched 05:51:01.312024 run osmo-stp_10.42.42.5(pid=32533): Launched 05:51:01.538624 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:51:02.125546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32535): Launched 05:51:02.241861 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:51:02.523600 run patchelf(pid=32536): Launched 05:51:02.711505 run osmo-stp_10.42.42.5(pid=32533): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32533)] 05:51:02.848647 run osmo-stp_10.42.42.5(pid=32533): stdout: | (launched: 2022-12-10_05:51:00.904047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:51:02.986950 run osmo-stp_10.42.42.5(pid=32533): stderr: | �[0;m�[38;5;43m20221210055101153 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055101154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055101154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055101156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055101156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055101157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055101157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:51:03.119656 run osmo-stp_10.42.42.5(pid=32533): stdout: | (launched: 2022-12-10_05:51:00.904047) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:51:03.251081 run osmo-stp_10.42.42.5(pid=32533): stderr: | �[0;m�[38;5;43m20221210055101153 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055101154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055101154 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055101156 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055101156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055101157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055101157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:51:03.403695 run patchelf(pid=32536): Terminating (SIGINT) 05:51:03.582884 run patchelf(pid=32536): Terminated: ok {rc=0} 05:51:03.615394 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=32533): Process ended prematurely: osmo-stp_10.42.42.5(pid=32533) [trial-2370↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32533)] [trial-2370↪gprs:trx-b200↪ping_idle_ping.py:27] 05:51:03.624689 tst ping_idle_ping.py:27: Test FAILED (7.0 sec) 05:51:03.687344 run osmo-hlr_10.42.42.2(pid=32530): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32530)] 05:51:03.738627 run osmo-hlr_10.42.42.2(pid=32530): stdout: | (launched: 2022-12-10_05:50:59.876033) 05:51:03.790497 run osmo-hlr_10.42.42.2(pid=32530): stderr: | �[0;m�[1;31m20221210055100079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055100079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055100079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055100079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055100079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055100080 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055100092 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055100100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055100100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055100100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:51:03.834904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32529): Terminating (SIGTERM) 05:51:03.876571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32532): Terminating (SIGTERM) 05:51:03.918496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32535): Terminating (SIGTERM) 05:51:03.928235 --- ParallelTerminationStrategy: PID 32529 died... 05:51:03.985480 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32529): Terminated: ok {rc=0} 05:51:03.995662 --- ParallelTerminationStrategy: PID 32532 died... 05:51:04.051444 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32532): Terminated: ok {rc=0} 05:51:04.062009 --- ParallelTerminationStrategy: PID 32535 died... 05:51:04.117713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32535): Terminated: ok {rc=0} 05:51:04.204333 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32533): Process ended prematurely: osmo-stp_10.42.42.5(pid=32533) [trial-2370↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32533)]