Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=32523): Process ended prematurely: osmo-stp_10.42.42.5(pid=32523) [trial-2370↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32523)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-b200 ping.py ---------------------------------------------- 05:50:48.522556 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:48.534589 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 05:50:48.678460 tst ping.py: using LAC 26285 05:50:48.803860 tst ping.py: using RAC 20 05:50:48.929245 tst ping.py: using CellId 26285 05:50:49.056012 tst ping.py: using BVCI 26286 05:50:49.080539 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.091581 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.102555 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.113475 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.124264 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.135222 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.146257 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 05:50:49.157195 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 05:50:49.445327 tst ping.py:19: start network... 05:50:49.578232 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:50:50.089896 run create_hlr_db(pid=32517): Launched 05:50:50.274856 bus /gobi_6: Setting Powered False 05:50:51.294755 run create_hlr_db(pid=32517): Terminated: ok {rc=0} 05:50:51.699169 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32519): Launched 05:50:52.001056 run osmo-hlr_10.42.42.2(pid=32520): Launched 05:50:52.115822 run osmo-stp_10.42.42.5: Starting osmo-stp 05:50:52.648277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32522): Launched 05:50:52.950172 run osmo-stp_10.42.42.5(pid=32523): Launched 05:50:53.059490 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:50:53.583992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32525): Launched 05:50:53.691069 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:50:53.956235 run patchelf(pid=32526): Launched 05:50:54.132235 run osmo-stp_10.42.42.5(pid=32523): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32523)] 05:50:54.260815 run osmo-stp_10.42.42.5(pid=32523): stdout: | (launched: 2022-12-10_05:50:52.800653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:54.389662 run osmo-stp_10.42.42.5(pid=32523): stderr: | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055052976 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055052976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055052976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055052977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:54.513506 run osmo-stp_10.42.42.5(pid=32523): stdout: | (launched: 2022-12-10_05:50:52.800653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:50:54.636295 run osmo-stp_10.42.42.5(pid=32523): stderr: | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055052975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055052976 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055052976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055052976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055052977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:50:54.779716 run patchelf(pid=32526): Terminating (SIGINT) 05:50:54.947517 run patchelf(pid=32526): Terminated: ok {rc=0} 05:50:54.978188 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=32523): Process ended prematurely: osmo-stp_10.42.42.5(pid=32523) [trial-2370↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32523)] [trial-2370↪gprs:trx-b200↪ping.py:22] 05:50:54.986913 tst ping.py:22: Test FAILED (6.5 sec) 05:50:55.047631 run osmo-hlr_10.42.42.2(pid=32520): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32520)] 05:50:55.097113 run osmo-hlr_10.42.42.2(pid=32520): stdout: | (launched: 2022-12-10_05:50:51.851029) 05:50:55.146988 run osmo-hlr_10.42.42.2(pid=32520): stderr: | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055052031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055052043 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055052052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055052052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055052052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:50:55.189109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32519): Terminating (SIGTERM) 05:50:55.229114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32522): Terminating (SIGTERM) 05:50:55.269411 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32525): Terminating (SIGTERM) 05:50:55.279040 --- ParallelTerminationStrategy: PID 32519 died... 05:50:55.332386 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32519): Terminated: ok {rc=0} 05:50:55.342186 --- ParallelTerminationStrategy: PID 32522 died... 05:50:55.394955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32522): Terminated: ok {rc=0} 05:50:55.404791 --- ParallelTerminationStrategy: PID 32525 died... 05:50:55.457716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32525): Terminated: ok {rc=0} 05:50:55.545653 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32523): Process ended prematurely: osmo-stp_10.42.42.5(pid=32523) [trial-2370↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32523)]