Skip to content

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 51 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3585): Process ended prematurely: osmo-stp_10.42.42.5(pid=3585) [trial-2370↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3585)]

Standard Output

----------------------------------------------
trial-2370 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
06:16:46.328247 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:46.340390 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
06:16:46.496607 tst                ping_idle_ping.py: using LAC 26424
06:16:46.641903 tst                ping_idle_ping.py: using RAC 159
06:16:46.788158 tst                ping_idle_ping.py: using CellId 26424
06:16:46.934274 tst                ping_idle_ping.py: using BVCI 26425
06:16:46.965808 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:46.980531 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:46.995083 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:47.009727 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:47.025306 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:47.041093 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:47.057549 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
06:16:47.069616 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
06:16:47.371936 tst             ping_idle_ping.py:24: start network...
06:16:47.500112 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:16:47.995723 run          create_hlr_db(pid=3579): Launched
06:16:48.174772 bus                          /gobi_6: Setting Powered False
06:16:49.185733 run          create_hlr_db(pid=3579): Terminated: ok {rc=0}
06:16:49.604852 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3581): Launched
06:16:49.913322 run    osmo-hlr_10.42.42.2(pid=3582): Launched
06:16:50.030278 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:16:50.567111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3584): Launched
06:16:50.876321 run    osmo-stp_10.42.42.5(pid=3585): Launched
06:16:50.988330 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:16:51.526032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3587): Launched
06:16:51.635642 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:16:51.906110 run               patchelf(pid=3588): Launched
06:16:52.087071 run    osmo-stp_10.42.42.5(pid=3585): ERR: Terminated: ERROR {rc=1}  [trial-2370↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3585)]
06:16:52.219268 run    osmo-stp_10.42.42.5(pid=3585): stdout: 
| (launched: 2022-12-10_06:16:50.723533)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:16:52.353247 run    osmo-stp_10.42.42.5(pid=3585): stderr: 
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210061650915 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:16:52.480899 run    osmo-stp_10.42.42.5(pid=3585): stdout: 
| (launched: 2022-12-10_06:16:50.723533)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:16:52.607552 run    osmo-stp_10.42.42.5(pid=3585): stderr: 
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210061650914 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210061650915 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210061650915 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:16:52.755080 run               patchelf(pid=3588): Terminating (SIGINT)
06:16:52.927455 run               patchelf(pid=3588): Terminated: ok {rc=0}
06:16:52.958853 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3585): Process ended prematurely: osmo-stp_10.42.42.5(pid=3585) [trial-2370↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3585)]  [trial-2370↪gprs:trx-lms↪ping_idle_ping.py:27]
06:16:52.968114 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
06:16:53.029327 run    osmo-hlr_10.42.42.2(pid=3582): ERR: Terminated: ERROR {rc=237}  [trial-2370↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3582)]
06:16:53.079284 run    osmo-hlr_10.42.42.2(pid=3582): stdout: 
| (launched: 2022-12-10_06:16:49.761763) 
06:16:53.130024 run    osmo-hlr_10.42.42.2(pid=3582): stderr: 
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210061649957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210061649969 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210061649978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210061649978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210061649978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:16:53.173256 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3581): Terminating (SIGTERM)
06:16:53.213935 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3584): Terminating (SIGTERM)
06:16:53.254642 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3587): Terminating (SIGTERM)
06:16:53.263781 ---      ParallelTerminationStrategy: PID 3581 died...
06:16:53.318438 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3581): Terminated: ok {rc=0}
06:16:53.328376 ---      ParallelTerminationStrategy: PID 3584 died...
06:16:53.382905 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3584): Terminated: ok {rc=0}
06:16:53.392721 ---      ParallelTerminationStrategy: PID 3587 died...
06:16:53.447152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3587): Terminated: ok {rc=0}
06:16:53.533400 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3585): Process ended prematurely: osmo-stp_10.42.42.5(pid=3585) [trial-2370↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3585)]