Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=3207): Process ended prematurely: osmo-stp_10.42.42.5(pid=3207) [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3207)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 06:11:23.957114 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:23.969587 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:11:24.115780 tst iperf3.py: using LAC 26394 06:11:24.239495 tst iperf3.py: using RAC 129 06:11:24.366227 tst iperf3.py: using CellId 26394 06:11:24.486720 tst iperf3.py: using BVCI 26395 06:11:24.510541 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.522141 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.533646 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.545217 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.556628 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.568216 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.580086 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.591629 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:24.603287 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:11:24.871858 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:11:24.992585 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:11:25.294284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3199): Launched 06:11:25.545513 run iperf3-srv_10.42.42.10(pid=3200): Launched 06:11:25.723388 tst iperf3.py:8: start network... 06:11:25.844481 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:11:26.304496 run create_hlr_db(pid=3201): Launched 06:11:26.471198 bus /gobi_6: Setting Powered False 06:11:27.493292 run create_hlr_db(pid=3201): Terminated: ok {rc=0} 06:11:27.881314 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3203): Launched 06:11:28.173082 run osmo-hlr_10.42.42.2(pid=3204): Launched 06:11:28.284818 run osmo-stp_10.42.42.5: Starting osmo-stp 06:11:28.800138 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3206): Launched 06:11:29.091639 run osmo-stp_10.42.42.5(pid=3207): Launched 06:11:29.199502 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:11:29.705809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3209): Launched 06:11:29.809249 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:11:30.063380 run patchelf(pid=3210): Launched 06:11:30.234211 run osmo-stp_10.42.42.5(pid=3207): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3207)] 06:11:30.358906 run osmo-stp_10.42.42.5(pid=3207): stdout: | (launched: 2022-12-10_06:11:28.947446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:30.483678 run osmo-stp_10.42.42.5(pid=3207): stderr: | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061129118 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:30.604003 run osmo-stp_10.42.42.5(pid=3207): stdout: | (launched: 2022-12-10_06:11:28.947446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:30.723536 run osmo-stp_10.42.42.5(pid=3207): stderr: | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061129117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061129118 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061129118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:30.871078 run patchelf(pid=3210): Terminating (SIGINT) 06:11:31.037991 run patchelf(pid=3210): Terminated: ok {rc=0} 06:11:31.069220 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3207): Process ended prematurely: osmo-stp_10.42.42.5(pid=3207) [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3207)] [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 06:11:31.079462 tst iperf3.py:8: Test FAILED (7.2 sec) 06:11:31.139995 run osmo-hlr_10.42.42.2(pid=3204): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3204)] 06:11:31.189126 run osmo-hlr_10.42.42.2(pid=3204): stdout: | (launched: 2022-12-10_06:11:28.028912) 06:11:31.238674 run osmo-hlr_10.42.42.2(pid=3204): stderr: | �[0;m�[1;31m20221210061128203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210061128203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210061128203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210061128203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210061128203 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210061128204 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210061128216 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210061128224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210061128225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210061128225 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:11:31.280645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3199): Terminating (SIGTERM) 06:11:31.320634 run iperf3-srv_10.42.42.10(pid=3200): Terminating (SIGTERM) 06:11:31.360382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3203): Terminating (SIGTERM) 06:11:31.400193 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3206): Terminating (SIGTERM) 06:11:31.440355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3209): Terminating (SIGTERM) 06:11:31.449643 --- ParallelTerminationStrategy: PID 3199 died... 06:11:31.502840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3199): Terminated: ok {rc=0} 06:11:31.513133 --- ParallelTerminationStrategy: PID 3200 died... 06:11:31.566133 run iperf3-srv_10.42.42.10(pid=3200): Terminated {rc=256} 06:11:31.576284 --- ParallelTerminationStrategy: PID 3203 died... 06:11:31.629707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3203): Terminated: ok {rc=0} 06:11:31.639577 --- ParallelTerminationStrategy: PID 3206 died... 06:11:31.692715 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3206): Terminated: ok {rc=0} 06:11:31.702962 --- ParallelTerminationStrategy: PID 3209 died... 06:11:31.756344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3209): Terminated: ok {rc=0} 06:11:31.840445 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3207): Process ended prematurely: osmo-stp_10.42.42.5(pid=3207) [trial-2370↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3207)]