Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14563): Process ended prematurely: osmo-stp_10.42.42.5(pid=14563) [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14563)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 08:04:52.206036 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.218455 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:04:52.360386 tst ping.py: using LAC 27002 08:04:52.477434 tst ping.py: using RAC 227 08:04:52.591113 tst ping.py: using CellId 27002 08:04:52.704296 tst ping.py: using BVCI 27003 08:04:52.726757 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.737549 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.748186 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.759160 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.770042 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.780744 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.791743 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:04:52.802660 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:04:53.070500 tst ping.py:19: start network... 08:04:53.190703 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:04:53.644499 run create_hlr_db(pid=14557): Launched 08:04:53.811554 bus /gobi_6: Setting Powered False 08:04:54.832926 run create_hlr_db(pid=14557): Terminated: ok {rc=0} 08:04:55.246895 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14559): Launched 08:04:55.557607 run osmo-hlr_10.42.42.2(pid=14560): Launched 08:04:55.672556 run osmo-stp_10.42.42.5: Starting osmo-stp 08:04:56.216689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14562): Launched 08:04:56.528246 run osmo-stp_10.42.42.5(pid=14563): Launched 08:04:56.641424 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:04:57.183248 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14565): Launched 08:04:57.294332 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:04:57.565095 run patchelf(pid=14566): Launched 08:04:57.747629 run osmo-stp_10.42.42.5(pid=14563): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14563)] 08:04:57.881068 run osmo-stp_10.42.42.5(pid=14563): stdout: | (launched: 2022-12-10_08:04:56.374844) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:04:58.014735 run osmo-stp_10.42.42.5(pid=14563): stderr: | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080456564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:04:58.143503 run osmo-stp_10.42.42.5(pid=14563): stdout: | (launched: 2022-12-10_08:04:56.374844) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:04:58.271015 run osmo-stp_10.42.42.5(pid=14563): stderr: | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080456563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080456564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080456564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:04:58.419825 run patchelf(pid=14566): Terminating (SIGINT) 08:04:58.595125 run patchelf(pid=14566): Terminated: ok {rc=0} 08:04:58.626689 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14563): Process ended prematurely: osmo-stp_10.42.42.5(pid=14563) [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14563)] [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 08:04:58.635750 tst ping.py:22: Test FAILED (6.4 sec) 08:04:58.698190 run osmo-hlr_10.42.42.2(pid=14560): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14560)] 08:04:58.749168 run osmo-hlr_10.42.42.2(pid=14560): stdout: | (launched: 2022-12-10_08:04:55.404810) 08:04:58.800738 run osmo-hlr_10.42.42.2(pid=14560): stderr: | �[0;m�[1;31m20221210080455599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210080455599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210080455599 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210080455600 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210080455600 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210080455600 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210080455618 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210080455626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210080455627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210080455627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:04:58.845035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14559): Terminating (SIGTERM) 08:04:58.886877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14562): Terminating (SIGTERM) 08:04:58.928636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14565): Terminating (SIGTERM) 08:04:58.938491 --- ParallelTerminationStrategy: PID 14559 died... 08:04:58.994699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14559): Terminated: ok {rc=0} 08:04:59.004915 --- ParallelTerminationStrategy: PID 14562 died... 08:04:59.060686 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14562): Terminated: ok {rc=0} 08:04:59.071152 --- ParallelTerminationStrategy: PID 14565 died... 08:04:59.126912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14565): Terminated: ok {rc=0} 08:04:59.212212 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14563): Process ended prematurely: osmo-stp_10.42.42.5(pid=14563) [trial-2371↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14563)]