Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8494): Process ended prematurely: osmo-stp_10.42.42.5(pid=8494) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8494)]
Standard Output
---------------------------------------------- trial-2371 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:02:13.119997 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.131026 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:02:13.275515 tst cs_paging_gprs_active.py: using LAC 26665 07:02:13.398357 tst cs_paging_gprs_active.py: using RAC 145 07:02:13.521332 tst cs_paging_gprs_active.py: using CellId 26665 07:02:13.643459 tst cs_paging_gprs_active.py: using BVCI 26666 07:02:13.667217 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.678140 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.688926 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.700136 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.711242 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.722325 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.733551 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.744369 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:02:13.755513 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:02:13.879739 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:02:14.165634 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:02:14.295643 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:14.619717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8484): Launched 07:02:14.889309 run iperf3-srv_10.42.42.10(pid=8485): Launched 07:02:15.079734 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:02:15.210071 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:15.534364 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8486): Launched 07:02:15.803942 run iperf3-srv_10.42.42.10(pid=8487): Launched 07:02:16.033560 tst cs_paging_gprs_active.py:38: start network... 07:02:16.178654 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:02:16.763393 run create_hlr_db(pid=8488): Launched 07:02:16.962925 bus /gobi_6: Setting Powered False 07:02:17.968427 run create_hlr_db(pid=8488): Terminated: ok {rc=0} 07:02:18.428702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8490): Launched 07:02:18.765063 run osmo-hlr_10.42.42.2(pid=8491): Launched 07:02:18.888325 run osmo-stp_10.42.42.5: Starting osmo-stp 07:02:19.471454 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8493): Launched 07:02:19.807252 run osmo-stp_10.42.42.5(pid=8494): Launched 07:02:19.929533 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:02:20.516316 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8496): Launched 07:02:20.635751 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:02:20.930789 run patchelf(pid=8497): Launched 07:02:21.126566 run osmo-stp_10.42.42.5(pid=8494): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8494)] 07:02:21.269080 run osmo-stp_10.42.42.5(pid=8494): stdout: | (launched: 2022-12-10_07:02:19.641740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:02:21.412224 run osmo-stp_10.42.42.5(pid=8494): stderr: | �[0;m�[38;5;43m20221210070219839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070219839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070219840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070219840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:02:21.550061 run osmo-stp_10.42.42.5(pid=8494): stdout: | (launched: 2022-12-10_07:02:19.641740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:02:21.686769 run osmo-stp_10.42.42.5(pid=8494): stderr: | �[0;m�[38;5;43m20221210070219839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070219839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070219840 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070219840 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070219841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:02:21.846841 run patchelf(pid=8497): Terminating (SIGINT) 07:02:22.035845 run patchelf(pid=8497): Terminated: ok {rc=0} 07:02:22.070084 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8494): Process ended prematurely: osmo-stp_10.42.42.5(pid=8494) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8494)] [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:02:22.080293 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 07:02:22.144520 run osmo-hlr_10.42.42.2(pid=8491): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8491)] 07:02:22.196595 run osmo-hlr_10.42.42.2(pid=8491): stdout: | (launched: 2022-12-10_07:02:18.599488) 07:02:22.249757 run osmo-hlr_10.42.42.2(pid=8491): stderr: | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210070218804 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210070218817 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210070218825 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210070218826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210070218826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:02:22.294695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8484): Terminating (SIGTERM) 07:02:22.337325 run iperf3-srv_10.42.42.10(pid=8485): Terminating (SIGTERM) 07:02:22.380138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8486): Terminating (SIGTERM) 07:02:22.422768 run iperf3-srv_10.42.42.10(pid=8487): Terminating (SIGTERM) 07:02:22.465433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8490): Terminating (SIGTERM) 07:02:22.507883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8493): Terminating (SIGTERM) 07:02:22.550522 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8496): Terminating (SIGTERM) 07:02:22.560353 --- ParallelTerminationStrategy: PID 8484 died... 07:02:22.618150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8484): Terminated: ok {rc=0} 07:02:22.628454 --- ParallelTerminationStrategy: PID 8485 died... 07:02:22.685105 run iperf3-srv_10.42.42.10(pid=8485): Terminated {rc=256} 07:02:22.695426 --- ParallelTerminationStrategy: PID 8486 died... 07:02:22.751996 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8486): Terminated: ok {rc=0} 07:02:22.762263 --- ParallelTerminationStrategy: PID 8487 died... 07:02:22.818644 run iperf3-srv_10.42.42.10(pid=8487): Terminated {rc=256} 07:02:22.828810 --- ParallelTerminationStrategy: PID 8490 died... 07:02:22.885539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8490): Terminated: ok {rc=0} 07:02:22.895813 --- ParallelTerminationStrategy: PID 8493 died... 07:02:22.952589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8493): Terminated: ok {rc=0} 07:02:22.962928 --- ParallelTerminationStrategy: PID 8496 died... 07:02:23.019573 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8496): Terminated: ok {rc=0} 07:02:23.108702 bus /gobi_0: Setting Powered False 07:02:24.218073 bus /gobi_0: Setting Powered False 07:02:25.331935 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8494): Process ended prematurely: osmo-stp_10.42.42.5(pid=8494) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8494)]