Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 41 builds (Since #2331 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8539): Process ended prematurely: osmo-stp_10.42.42.5(pid=8539) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8539)]

Standard Output

----------------------------------------------
trial-2371 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
07:02:56.076673 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.088928 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
07:02:56.243976 tst                          ping.py: using LAC 26668
07:02:56.371860 tst                          ping.py: using RAC 148
07:02:56.501461 tst                          ping.py: using CellId 26668
07:02:56.631100 tst                          ping.py: using BVCI 26669
07:02:56.656320 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.667887 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.679134 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.690378 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.701465 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.712438 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.723920 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
07:02:56.735153 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
07:02:57.015715 tst                       ping.py:19: start network...
07:02:57.143082 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:02:57.625845 run          create_hlr_db(pid=8533): Launched
07:02:57.802230 bus                          /gobi_6: Setting Powered False
07:02:58.823595 run          create_hlr_db(pid=8533): Terminated: ok {rc=0}
07:02:59.233610 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8535): Launched
07:02:59.542662 run    osmo-hlr_10.42.42.2(pid=8536): Launched
07:02:59.658579 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:03:00.199421 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8538): Launched
07:03:00.506993 run    osmo-stp_10.42.42.5(pid=8539): Launched
07:03:00.618742 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:03:01.203259 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8541): Launched
07:03:01.325753 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:03:01.652392 run               patchelf(pid=8543): Launched
07:03:01.875631 run    osmo-stp_10.42.42.5(pid=8539): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8539)]
07:03:02.010073 run    osmo-stp_10.42.42.5(pid=8539): stdout: 
| (launched: 2022-12-10_07:03:00.354344)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:02.144835 run    osmo-stp_10.42.42.5(pid=8539): stderr: 
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070300527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:02.274779 run    osmo-stp_10.42.42.5(pid=8539): stdout: 
| (launched: 2022-12-10_07:03:00.354344)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:02.399917 run    osmo-stp_10.42.42.5(pid=8539): stderr: 
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070300527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070300527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070300528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:02.546138 run               patchelf(pid=8543): Terminating (SIGINT)
07:03:02.717929 run               patchelf(pid=8543): Terminated: ok {rc=0}
07:03:02.749193 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8539): Process ended prematurely: osmo-stp_10.42.42.5(pid=8539) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8539)]  [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
07:03:02.758122 tst                       ping.py:22: Test FAILED (6.7 sec)
07:03:02.820176 run    osmo-hlr_10.42.42.2(pid=8536): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8536)]
07:03:02.870557 run    osmo-hlr_10.42.42.2(pid=8536): stdout: 
| (launched: 2022-12-10_07:02:59.388626) 
07:03:02.921385 run    osmo-hlr_10.42.42.2(pid=8536): stderr: 
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210070259567 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210070259580 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210070259588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210070259588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210070259588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:03:02.964264 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8535): Terminating (SIGTERM)
07:03:03.005427 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8538): Terminating (SIGTERM)
07:03:03.046124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8541): Terminating (SIGTERM)
07:03:03.055841 ---      ParallelTerminationStrategy: PID 8535 died...
07:03:03.111024 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8535): Terminated: ok {rc=0}
07:03:03.120933 ---      ParallelTerminationStrategy: PID 8538 died...
07:03:03.176018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8538): Terminated: ok {rc=0}
07:03:03.185866 ---      ParallelTerminationStrategy: PID 8541 died...
07:03:03.241147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8541): Terminated: ok {rc=0}
07:03:03.331289 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8539): Process ended prematurely: osmo-stp_10.42.42.5(pid=8539) [trial-2371↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8539)]