Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8438): Process ended prematurely: osmo-stp_10.42.42.5(pid=8438) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8438)]
Standard Output
---------------------------------------------- trial-2371 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 07:01:25.550547 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:25.562613 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:01:25.693155 tst iperf3.py: using LAC 26661 07:01:25.818181 tst iperf3.py: using RAC 141 07:01:25.942478 tst iperf3.py: using CellId 26661 07:01:26.067121 tst iperf3.py: using BVCI 26662 07:01:26.091073 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.102052 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.112735 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.123648 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.134558 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.145432 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.156190 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.167234 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:01:26.178378 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:01:26.482296 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 07:01:26.621733 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:01:26.966629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8430): Launched 07:01:27.255954 run iperf3-srv_10.42.42.10(pid=8431): Launched 07:01:27.459851 tst iperf3.py:8: start network... 07:01:27.599526 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:01:28.125804 run create_hlr_db(pid=8432): Launched 07:01:28.305352 bus /gobi_6: Setting Powered False 07:01:29.325806 run create_hlr_db(pid=8432): Terminated: ok {rc=0} 07:01:29.769297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8434): Launched 07:01:30.103726 run osmo-hlr_10.42.42.2(pid=8435): Launched 07:01:30.226851 run osmo-stp_10.42.42.5: Starting osmo-stp 07:01:30.804935 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8437): Launched 07:01:31.312561 run osmo-stp_10.42.42.5(pid=8438): Launched 07:01:31.446328 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:01:32.055746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8440): Launched 07:01:32.177947 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:01:32.471521 run patchelf(pid=8441): Launched 07:01:32.665722 run osmo-stp_10.42.42.5(pid=8438): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8438)] 07:01:32.807740 run osmo-stp_10.42.42.5(pid=8438): stdout: | (launched: 2022-12-10_07:01:31.002992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:01:32.950002 run osmo-stp_10.42.42.5(pid=8438): stderr: | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070131205 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:01:33.088307 run osmo-stp_10.42.42.5(pid=8438): stdout: | (launched: 2022-12-10_07:01:31.002992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:01:33.224629 run osmo-stp_10.42.42.5(pid=8438): stderr: | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210070131204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210070131205 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210070131207 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:01:33.383514 run patchelf(pid=8441): Terminating (SIGINT) 07:01:33.570817 run patchelf(pid=8441): Terminated: ok {rc=0} 07:01:33.605190 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8438): Process ended prematurely: osmo-stp_10.42.42.5(pid=8438) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8438)] [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 07:01:33.615346 tst iperf3.py:8: Test FAILED (8.1 sec) 07:01:33.679060 run osmo-hlr_10.42.42.2(pid=8435): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8435)] 07:01:33.731093 run osmo-hlr_10.42.42.2(pid=8435): stdout: | (launched: 2022-12-10_07:01:29.939154) 07:01:33.783795 run osmo-hlr_10.42.42.2(pid=8435): stderr: | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210070130140 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210070130152 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210070130163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210070130164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210070130164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:01:33.828872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8430): Terminating (SIGTERM) 07:01:33.871316 run iperf3-srv_10.42.42.10(pid=8431): Terminating (SIGTERM) 07:01:33.913876 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8434): Terminating (SIGTERM) 07:01:33.956011 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8437): Terminating (SIGTERM) 07:01:33.998460 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8440): Terminating (SIGTERM) 07:01:34.008213 --- ParallelTerminationStrategy: PID 8430 died... 07:01:34.065266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8430): Terminated: ok {rc=0} 07:01:34.075498 --- ParallelTerminationStrategy: PID 8431 died... 07:01:34.132169 run iperf3-srv_10.42.42.10(pid=8431): Terminated {rc=256} 07:01:34.142384 --- ParallelTerminationStrategy: PID 8434 died... 07:01:34.198865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8434): Terminated: ok {rc=0} 07:01:34.209155 --- ParallelTerminationStrategy: PID 8437 died... 07:01:34.265756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8437): Terminated: ok {rc=0} 07:01:34.275925 --- ParallelTerminationStrategy: PID 8440 died... 07:01:34.332515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8440): Terminated: ok {rc=0} 07:01:34.420253 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8438): Process ended prematurely: osmo-stp_10.42.42.5(pid=8438) [trial-2371↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8438)]