Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 41 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8408): Process ended prematurely: osmo-stp_10.42.42.5(pid=8408) [trial-2371↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8408)]

Standard Output

----------------------------------------------
trial-2371 gprs:sysmo ping_idle_ping.py
----------------------------------------------
07:01:03.257210 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.269103 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
07:01:03.403194 tst                ping_idle_ping.py: using LAC 26659
07:01:03.530781 tst                ping_idle_ping.py: using RAC 139
07:01:03.659061 tst                ping_idle_ping.py: using CellId 26659
07:01:03.789483 tst                ping_idle_ping.py: using BVCI 26660
07:01:03.814619 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.825719 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.836636 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.847769 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.858900 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.869920 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.881219 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
07:01:03.892260 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
07:01:04.185177 tst             ping_idle_ping.py:24: start network...
07:01:04.313325 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:01:04.796385 run          create_hlr_db(pid=8402): Launched
07:01:04.973287 bus                          /gobi_6: Setting Powered False
07:01:05.992866 run          create_hlr_db(pid=8402): Terminated: ok {rc=0}
07:01:06.401447 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8404): Launched
07:01:06.710938 run    osmo-hlr_10.42.42.2(pid=8405): Launched
07:01:06.831343 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:01:07.371851 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8407): Launched
07:01:07.691997 run    osmo-stp_10.42.42.5(pid=8408): Launched
07:01:07.812892 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:01:08.387450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8410): Launched
07:01:08.504873 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:01:08.794158 run               patchelf(pid=8411): Launched
07:01:08.985915 run    osmo-stp_10.42.42.5(pid=8408): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8408)]
07:01:09.127020 run    osmo-stp_10.42.42.5(pid=8408): stdout: 
| (launched: 2022-12-10_07:01:07.526602)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:01:09.267369 run    osmo-stp_10.42.42.5(pid=8408): stderr: 
| �[0;m�[38;5;43m20221210070107715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070107715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070107716 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070107716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:01:09.403715 run    osmo-stp_10.42.42.5(pid=8408): stdout: 
| (launched: 2022-12-10_07:01:07.526602)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:01:09.537897 run    osmo-stp_10.42.42.5(pid=8408): stderr: 
| �[0;m�[38;5;43m20221210070107715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210070107715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210070107716 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210070107716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070107717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:01:09.695619 run               patchelf(pid=8411): Terminating (SIGINT)
07:01:09.879132 run               patchelf(pid=8411): Terminated: ok {rc=0}
07:01:09.912341 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8408): Process ended prematurely: osmo-stp_10.42.42.5(pid=8408) [trial-2371↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8408)]  [trial-2371↪gprs:sysmo↪ping_idle_ping.py:27]
07:01:09.921518 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
07:01:09.984635 run    osmo-hlr_10.42.42.2(pid=8405): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8405)]
07:01:10.036429 run    osmo-hlr_10.42.42.2(pid=8405): stdout: 
| (launched: 2022-12-10_07:01:06.556430) 
07:01:10.089374 run    osmo-hlr_10.42.42.2(pid=8405): stderr: 
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210070106735 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210070106747 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210070106755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210070106755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210070106755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:01:10.134279 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8404): Terminating (SIGTERM)
07:01:10.176430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8407): Terminating (SIGTERM)
07:01:10.218824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8410): Terminating (SIGTERM)
07:01:10.228547 ---      ParallelTerminationStrategy: PID 8404 died...
07:01:10.285240 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8404): Terminated: ok {rc=0}
07:01:10.295509 ---      ParallelTerminationStrategy: PID 8407 died...
07:01:10.352181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8407): Terminated: ok {rc=0}
07:01:10.362489 ---      ParallelTerminationStrategy: PID 8410 died...
07:01:10.419024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8410): Terminated: ok {rc=0}
07:01:10.507958 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8408): Process ended prematurely: osmo-stp_10.42.42.5(pid=8408) [trial-2371↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8408)]