Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 186 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9832): Process ended prematurely: osmo-stp_10.42.42.5(pid=9832) [trial-2371↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9832)]

Standard Output

----------------------------------------------
trial-2371 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
07:17:26.468216 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:26.479734 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
07:17:26.625756 tst                ping_idle_ping.py: using LAC 26747
07:17:26.746196 tst                ping_idle_ping.py: using RAC 227
07:17:26.866610 tst                ping_idle_ping.py: using CellId 26747
07:17:26.984624 tst                ping_idle_ping.py: using BVCI 26748
07:17:27.006809 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.017285 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.027515 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.038809 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.049862 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.060809 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.071993 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
07:17:27.083435 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
07:17:27.368856 tst             ping_idle_ping.py:24: start network...
07:17:27.498670 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:17:27.998929 run          create_hlr_db(pid=9826): Launched
07:17:28.179211 bus                          /gobi_6: Setting Powered False
07:17:29.200562 run          create_hlr_db(pid=9826): Terminated: ok {rc=0}
07:17:29.591467 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9828): Launched
07:17:29.882409 run    osmo-hlr_10.42.42.2(pid=9829): Launched
07:17:29.988935 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:17:30.491125 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9831): Launched
07:17:30.781500 run    osmo-stp_10.42.42.5(pid=9832): Launched
07:17:30.961051 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:17:31.564394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9834): Launched
07:17:31.694101 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:17:31.989740 run               patchelf(pid=9835): Launched
07:17:32.178771 run    osmo-stp_10.42.42.5(pid=9832): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9832)]
07:17:32.314052 run    osmo-stp_10.42.42.5(pid=9832): stdout: 
| (launched: 2022-12-10_07:17:30.638111)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:17:32.448345 run    osmo-stp_10.42.42.5(pid=9832): stderr: 
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210071730808 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:17:32.578027 run    osmo-stp_10.42.42.5(pid=9832): stdout: 
| (launched: 2022-12-10_07:17:30.638111)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:17:32.706362 run    osmo-stp_10.42.42.5(pid=9832): stderr: 
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210071730807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210071730808 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210071730808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:17:32.855452 run               patchelf(pid=9835): Terminating (SIGINT)
07:17:33.031143 run               patchelf(pid=9835): Terminated: ok {rc=0}
07:17:33.063095 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9832): Process ended prematurely: osmo-stp_10.42.42.5(pid=9832) [trial-2371↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9832)]  [trial-2371↪gprs:trx-b200↪ping_idle_ping.py:27]
07:17:33.072277 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
07:17:33.134888 run    osmo-hlr_10.42.42.2(pid=9829): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9829)]
07:17:33.186367 run    osmo-hlr_10.42.42.2(pid=9829): stdout: 
| (launched: 2022-12-10_07:17:29.738558) 
07:17:33.238468 run    osmo-hlr_10.42.42.2(pid=9829): stderr: 
| �[0;m�[1;31m20221210071729910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210071729911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210071729911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210071729911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210071729911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210071729911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210071729924 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210071729934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210071729934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210071729934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:17:33.282809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9828): Terminating (SIGTERM)
07:17:33.324890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9831): Terminating (SIGTERM)
07:17:33.366949 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9834): Terminating (SIGTERM)
07:17:33.376675 ---      ParallelTerminationStrategy: PID 9828 died...
07:17:33.432818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9828): Terminated: ok {rc=0}
07:17:33.443185 ---      ParallelTerminationStrategy: PID 9831 died...
07:17:33.498464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9831): Terminated: ok {rc=0}
07:17:33.508462 ---      ParallelTerminationStrategy: PID 9834 died...
07:17:33.564085 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9834): Terminated: ok {rc=0}
07:17:33.649923 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9832): Process ended prematurely: osmo-stp_10.42.42.5(pid=9832) [trial-2371↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9832)]