Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11443): Process ended prematurely: osmo-stp_10.42.42.5(pid=11443) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11443)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:28:22.339575 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.351150 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:28:22.515448 tst cs_paging_gprs_active.py: using LAC 26805 07:28:22.639535 tst cs_paging_gprs_active.py: using RAC 30 07:28:22.763872 tst cs_paging_gprs_active.py: using CellId 26805 07:28:22.883927 tst cs_paging_gprs_active.py: using BVCI 26806 07:28:22.906754 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.917594 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.928440 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.939402 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.950196 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.960767 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.972658 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.983778 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:28:22.994796 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:28:23.110317 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:28:23.384615 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:28:23.508157 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:28:23.816350 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11433): Launched 07:28:24.072063 run iperf3-srv_10.42.42.10(pid=11434): Launched 07:28:24.253968 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:28:24.378229 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:28:24.685840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11435): Launched 07:28:24.940384 run iperf3-srv_10.42.42.10(pid=11436): Launched 07:28:25.121465 tst cs_paging_gprs_active.py:38: start network... 07:28:25.244701 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:28:25.709886 run create_hlr_db(pid=11437): Launched 07:28:25.879881 bus /gobi_6: Setting Powered False 07:28:26.903022 run create_hlr_db(pid=11437): Terminated: ok {rc=0} 07:28:27.323590 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11439): Launched 07:28:27.620794 run osmo-hlr_10.42.42.2(pid=11440): Launched 07:28:27.734103 run osmo-stp_10.42.42.5: Starting osmo-stp 07:28:28.253589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11442): Launched 07:28:28.548781 run osmo-stp_10.42.42.5(pid=11443): Launched 07:28:28.657341 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:28:29.170338 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11445): Launched 07:28:29.275164 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:28:29.532112 run patchelf(pid=11446): Launched 07:28:29.704832 run osmo-stp_10.42.42.5(pid=11443): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11443)] 07:28:29.831432 run osmo-stp_10.42.42.5(pid=11443): stdout: | (launched: 2022-12-10_07:28:28.403615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:28:29.958450 run osmo-stp_10.42.42.5(pid=11443): stderr: | �[0;m�[38;5;43m20221210072828570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072828570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072828571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072828571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:28:30.080523 run osmo-stp_10.42.42.5(pid=11443): stdout: | (launched: 2022-12-10_07:28:28.403615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:28:30.201532 run osmo-stp_10.42.42.5(pid=11443): stderr: | �[0;m�[38;5;43m20221210072828570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210072828570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210072828571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210072828571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210072828573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:28:30.343233 run patchelf(pid=11446): Terminating (SIGINT) 07:28:30.510756 run patchelf(pid=11446): Terminated: ok {rc=0} 07:28:30.541662 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11443): Process ended prematurely: osmo-stp_10.42.42.5(pid=11443) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11443)] [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:28:30.550785 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 07:28:30.611086 run osmo-hlr_10.42.42.2(pid=11440): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11440)] 07:28:30.660353 run osmo-hlr_10.42.42.2(pid=11440): stdout: | (launched: 2022-12-10_07:28:27.474319) 07:28:30.710276 run osmo-hlr_10.42.42.2(pid=11440): stderr: | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210072827650 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210072827675 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210072827685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210072827685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210072827685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:28:30.752477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11433): Terminating (SIGTERM) 07:28:30.792393 run iperf3-srv_10.42.42.10(pid=11434): Terminating (SIGTERM) 07:28:30.840807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11435): Terminating (SIGTERM) 07:28:30.903770 run iperf3-srv_10.42.42.10(pid=11436): Terminating (SIGTERM) 07:28:30.950891 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11439): Terminating (SIGTERM) 07:28:30.996067 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11442): Terminating (SIGTERM) 07:28:31.042013 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11445): Terminating (SIGTERM) 07:28:31.052630 --- ParallelTerminationStrategy: PID 11433 died... 07:28:31.113394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11433): Terminated: ok {rc=0} 07:28:31.124345 --- ParallelTerminationStrategy: PID 11434 died... 07:28:31.184831 run iperf3-srv_10.42.42.10(pid=11434): Terminated {rc=256} 07:28:31.195800 --- ParallelTerminationStrategy: PID 11435 died... 07:28:31.255219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11435): Terminated: ok {rc=0} 07:28:31.266225 --- ParallelTerminationStrategy: PID 11436 died... 07:28:31.324179 run iperf3-srv_10.42.42.10(pid=11436): Terminated {rc=256} 07:28:31.336028 --- ParallelTerminationStrategy: PID 11439 died... 07:28:31.396351 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11439): Terminated: ok {rc=0} 07:28:31.408180 --- ParallelTerminationStrategy: PID 11442 died... 07:28:31.466623 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11442): Terminated: ok {rc=0} 07:28:31.478517 --- ParallelTerminationStrategy: PID 11445 died... 07:28:31.536693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11445): Terminated: ok {rc=0} 07:28:31.643362 bus /gobi_0: Setting Powered False 07:28:32.752761 bus /gobi_0: Setting Powered False 07:28:33.860416 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11443): Process ended prematurely: osmo-stp_10.42.42.5(pid=11443) [trial-2371↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11443)]