Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 233 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=11921): Process ended prematurely: osmo-stp_10.42.42.5(pid=11921) [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11921)]

Standard Output

----------------------------------------------
trial-2371 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
07:35:14.358897 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.370289 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
07:35:14.505233 tst                          ping.py: using LAC 26842
07:35:14.619356 tst                          ping.py: using RAC 67
07:35:14.745443 tst                          ping.py: using CellId 26842
07:35:14.867398 tst                          ping.py: using BVCI 26843
07:35:14.891771 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.903132 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.914293 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.925823 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.937110 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.948399 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.959789 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:35:14.971053 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
07:35:15.239001 tst                       ping.py:19: start network...
07:35:15.359967 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:35:15.821125 run         create_hlr_db(pid=11915): Launched
07:35:16.017176 bus                          /gobi_6: Setting Powered False
07:35:17.039637 run         create_hlr_db(pid=11915): Terminated: ok {rc=0}
07:35:17.461692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11917): Launched
07:35:17.774881 run   osmo-hlr_10.42.42.2(pid=11918): Launched
07:35:17.892398 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:35:18.435772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11920): Launched
07:35:18.747495 run   osmo-stp_10.42.42.5(pid=11921): Launched
07:35:18.860228 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:35:19.404778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11923): Launched
07:35:19.516452 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:35:19.788916 run              patchelf(pid=11924): Launched
07:35:19.971575 run   osmo-stp_10.42.42.5(pid=11921): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11921)]
07:35:20.105527 run   osmo-stp_10.42.42.5(pid=11921): stdout: 
| (launched: 2022-12-10_07:35:18.594244)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:35:20.239469 run   osmo-stp_10.42.42.5(pid=11921): stderr: 
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210073518784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210073518784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210073518784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210073518785 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:35:20.368543 run   osmo-stp_10.42.42.5(pid=11921): stdout: 
| (launched: 2022-12-10_07:35:18.594244)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:35:20.496657 run   osmo-stp_10.42.42.5(pid=11921): stderr: 
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210073518783 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210073518784 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210073518784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210073518784 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210073518785 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:35:20.645990 run              patchelf(pid=11924): Terminating (SIGINT)
07:35:20.821330 run              patchelf(pid=11924): Terminated: ok {rc=0}
07:35:20.853102 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11921): Process ended prematurely: osmo-stp_10.42.42.5(pid=11921) [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11921)]  [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
07:35:20.862174 tst                       ping.py:22: Test FAILED (6.5 sec)
07:35:20.923917 run   osmo-hlr_10.42.42.2(pid=11918): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11918)]
07:35:20.974512 run   osmo-hlr_10.42.42.2(pid=11918): stdout: 
| (launched: 2022-12-10_07:35:17.621252) 
07:35:21.025801 run   osmo-hlr_10.42.42.2(pid=11918): stderr: 
| �[0;m�[1;31m20221210073517818 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210073517818 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210073517818 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210073517819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210073517819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210073517819 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210073517831 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210073517839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210073517839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210073517839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:35:21.069835 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11917): Terminating (SIGTERM)
07:35:21.111618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11920): Terminating (SIGTERM)
07:35:21.153206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11923): Terminating (SIGTERM)
07:35:21.163027 ---      ParallelTerminationStrategy: PID 11917 died...
07:35:21.218272 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11917): Terminated: ok {rc=0}
07:35:21.228451 ---      ParallelTerminationStrategy: PID 11920 died...
07:35:21.283459 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11920): Terminated: ok {rc=0}
07:35:21.293639 ---      ParallelTerminationStrategy: PID 11923 died...
07:35:21.348622 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11923): Terminated: ok {rc=0}
07:35:21.434962 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11921): Process ended prematurely: osmo-stp_10.42.42.5(pid=11921) [trial-2371↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11921)]