Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=17622): Process ended prematurely: osmo-stp_10.42.42.5(pid=17622) [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17622)]
Standard Output
---------------------------------------------- trial-2372 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:36:22.650266 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:22.661044 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:36:22.805931 tst cs_paging_gprs_active.py: using LAC 27168 08:36:22.924423 tst cs_paging_gprs_active.py: using RAC 138 08:36:23.043252 tst cs_paging_gprs_active.py: using CellId 27168 08:36:23.164082 tst cs_paging_gprs_active.py: using BVCI 27169 08:36:23.187395 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.198310 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.208942 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.220071 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.231153 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.242216 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.253356 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.264315 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:36:23.275564 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:36:23.393332 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:36:23.672935 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:36:23.799501 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:36:24.115419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17609): Launched 08:36:24.378613 run iperf3-srv_10.42.42.10(pid=17610): Launched 08:36:24.563983 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:36:24.691270 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:36:25.007308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17611): Launched 08:36:25.271147 run iperf3-srv_10.42.42.10(pid=17612): Launched 08:36:25.456127 tst cs_paging_gprs_active.py:38: start network... 08:36:25.582590 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:36:26.060935 run create_hlr_db(pid=17613): Launched 08:36:26.235497 bus /gobi_6: Setting Powered False 08:36:27.255938 run create_hlr_db(pid=17613): Terminated: ok {rc=0} 08:36:27.690347 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Launched 08:36:28.015384 run osmo-hlr_10.42.42.2(pid=17616): Launched 08:36:28.135513 run osmo-stp_10.42.42.5: Starting osmo-stp 08:36:28.696736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17621): Launched 08:36:29.023233 run osmo-stp_10.42.42.5(pid=17622): Launched 08:36:29.141556 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:36:29.704895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17624): Launched 08:36:29.819248 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:36:30.103130 run patchelf(pid=17625): Launched 08:36:30.289911 run osmo-stp_10.42.42.5(pid=17622): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17622)] 08:36:30.426654 run osmo-stp_10.42.42.5(pid=17622): stdout: | (launched: 2022-12-10_08:36:28.861606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:36:30.563568 run osmo-stp_10.42.42.5(pid=17622): stderr: | �[0;m�[38;5;43m20221210083629058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083629058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083629059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083629059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:36:30.695773 run osmo-stp_10.42.42.5(pid=17622): stdout: | (launched: 2022-12-10_08:36:28.861606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:36:30.827387 run osmo-stp_10.42.42.5(pid=17622): stderr: | �[0;m�[38;5;43m20221210083629058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210083629058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210083629059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210083629059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210083629060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:36:30.990731 run patchelf(pid=17625): Terminating (SIGINT) 08:36:31.165638 run patchelf(pid=17625): Terminated: ok {rc=0} 08:36:31.199152 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17622): Process ended prematurely: osmo-stp_10.42.42.5(pid=17622) [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17622)] [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:36:31.209344 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:36:31.274546 run osmo-hlr_10.42.42.2(pid=17616): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17616)] 08:36:31.325646 run osmo-hlr_10.42.42.2(pid=17616): stdout: | (launched: 2022-12-10_08:36:27.854023) 08:36:31.378102 run osmo-hlr_10.42.42.2(pid=17616): stderr: | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210083628057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210083628070 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210083628078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210083628078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210083628078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:36:31.423508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17609): Terminating (SIGTERM) 08:36:31.465334 run iperf3-srv_10.42.42.10(pid=17610): Terminating (SIGTERM) 08:36:31.509533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17611): Terminating (SIGTERM) 08:36:31.551560 run iperf3-srv_10.42.42.10(pid=17612): Terminating (SIGTERM) 08:36:31.595220 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Terminating (SIGTERM) 08:36:31.639080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17621): Terminating (SIGTERM) 08:36:31.684750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17624): Terminating (SIGTERM) 08:36:31.695305 --- ParallelTerminationStrategy: PID 17609 died... 08:36:31.752766 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17609): Terminated: ok {rc=0} 08:36:31.763396 --- ParallelTerminationStrategy: PID 17610 died... 08:36:31.825702 run iperf3-srv_10.42.42.10(pid=17610): Terminated {rc=256} 08:36:31.838158 --- ParallelTerminationStrategy: PID 17611 died... 08:36:31.906684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17611): Terminated: ok {rc=0} 08:36:31.919338 --- ParallelTerminationStrategy: PID 17612 died... 08:36:31.983422 run iperf3-srv_10.42.42.10(pid=17612): Terminated {rc=256} 08:36:31.994823 --- ParallelTerminationStrategy: PID 17615 died... 08:36:32.051234 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Terminated: ok {rc=0} 08:36:32.061729 --- ParallelTerminationStrategy: PID 17621 died... 08:36:32.116365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17621): Terminated: ok {rc=0} 08:36:32.127804 --- ParallelTerminationStrategy: PID 17624 died... 08:36:32.182166 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17624): Terminated: ok {rc=0} 08:36:32.269934 bus /gobi_0: Setting Powered False 08:36:33.375237 bus /gobi_0: Setting Powered False 08:36:34.484103 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17622): Process ended prematurely: osmo-stp_10.42.42.5(pid=17622) [trial-2372↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17622)]