Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22058): Process ended prematurely: osmo-stp_10.42.42.5(pid=22058) [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22058)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 09:12:14.626885 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:14.638645 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 09:12:14.805195 tst iperf3.py: using LAC 27358 09:12:14.934069 tst iperf3.py: using RAC 73 09:12:15.062659 tst iperf3.py: using CellId 27358 09:12:15.187920 tst iperf3.py: using BVCI 27359 09:12:15.212802 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.224028 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.235204 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.246342 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.257355 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.268369 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.279514 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.290641 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:12:15.302026 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:12:15.582717 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:12:15.710263 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:12:16.068223 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22050): Launched 09:12:16.359052 run iperf3-srv_10.42.42.10(pid=22051): Launched 09:12:16.549584 tst iperf3.py:8: start network... 09:12:16.680503 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:12:17.209944 run create_hlr_db(pid=22052): Launched 09:12:17.387917 bus /gobi_6: Setting Powered False 09:12:18.408076 run create_hlr_db(pid=22052): Terminated: ok {rc=0} 09:12:18.843315 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22054): Launched 09:12:19.173048 run osmo-hlr_10.42.42.2(pid=22055): Launched 09:12:19.292603 run osmo-stp_10.42.42.5: Starting osmo-stp 09:12:19.861397 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22057): Launched 09:12:20.189193 run osmo-stp_10.42.42.5(pid=22058): Launched 09:12:20.306959 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:12:20.875516 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22060): Launched 09:12:20.991696 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:12:21.277211 run patchelf(pid=22061): Launched 09:12:21.466108 run osmo-stp_10.42.42.5(pid=22058): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22058)] 09:12:21.603733 run osmo-stp_10.42.42.5(pid=22058): stdout: | (launched: 2022-12-10_09:12:20.026864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:12:21.742196 run osmo-stp_10.42.42.5(pid=22058): stderr: | �[0;m�[38;5;43m20221210091220222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091220222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091220223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091220223 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:12:21.876441 run osmo-stp_10.42.42.5(pid=22058): stdout: | (launched: 2022-12-10_09:12:20.026864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:12:22.010078 run osmo-stp_10.42.42.5(pid=22058): stderr: | �[0;m�[38;5;43m20221210091220222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091220222 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091220223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091220223 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091220224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:12:22.164054 run patchelf(pid=22061): Terminating (SIGINT) 09:12:22.344803 run patchelf(pid=22061): Terminated: ok {rc=0} 09:12:22.377865 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22058): Process ended prematurely: osmo-stp_10.42.42.5(pid=22058) [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22058)] [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 09:12:22.387574 tst iperf3.py:8: Test FAILED (7.8 sec) 09:12:22.450419 run osmo-hlr_10.42.42.2(pid=22055): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22055)] 09:12:22.501099 run osmo-hlr_10.42.42.2(pid=22055): stdout: | (launched: 2022-12-10_09:12:19.009260) 09:12:22.553071 run osmo-hlr_10.42.42.2(pid=22055): stderr: | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210091219212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210091219224 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210091219233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210091219233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210091219233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:12:22.596983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22050): Terminating (SIGTERM) 09:12:22.638385 run iperf3-srv_10.42.42.10(pid=22051): Terminating (SIGTERM) 09:12:22.679967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22054): Terminating (SIGTERM) 09:12:22.721420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22057): Terminating (SIGTERM) 09:12:22.763101 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22060): Terminating (SIGTERM) 09:12:22.772825 --- ParallelTerminationStrategy: PID 22050 died... 09:12:22.828343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22050): Terminated: ok {rc=0} 09:12:22.838506 --- ParallelTerminationStrategy: PID 22051 died... 09:12:22.893577 run iperf3-srv_10.42.42.10(pid=22051): Terminated {rc=256} 09:12:22.903671 --- ParallelTerminationStrategy: PID 22054 died... 09:12:22.959084 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22054): Terminated: ok {rc=0} 09:12:22.969930 --- ParallelTerminationStrategy: PID 22057 died... 09:12:23.025664 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22057): Terminated: ok {rc=0} 09:12:23.035941 --- ParallelTerminationStrategy: PID 22060 died... 09:12:23.091449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22060): Terminated: ok {rc=0} 09:12:23.178164 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22058): Process ended prematurely: osmo-stp_10.42.42.5(pid=22058) [trial-2372↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22058)]